An active load or dynamic load is a component or a circuit that functions as a current-stable nonlinear resistor. In circuit design, an active load is...

capacitors or inductors. Non-linear loads, such as rectifiers, distort the current drawn from the system. In such cases, active or passive power factor correction...

delivered to the load, usually a large current signal into the load implies a large voltage swing across the load as well.) An active load provides high...

tipping or even capsizing. Such a dangerous occurrence is prevented by active load management, avoiding high sea conditions for ships, and proper container/bulkhead...

system load is a measure of the amount of computational work that a computer system performs. The load average represents the average system load over a...

mode. Lumped tuners can be made for HF and VHF frequencies, whereas active load-pull is ideal for on-wafer mm-wave environments, where substantial loss...

eliminates the undesirable Miller effect; it drives an active load Q7 plus matched pair Q5, Q6. That active load is implemented as a modified Wilson current mirror;...

IE for DC emitter current) and driving another DC current source as active load (designated IC for DC collector current). The AC input signal current...

In computing, load balancing is the process of distributing a set of tasks over a set of resources (computing units), with the aim of making their overall...

A load-bearing wall or bearing wall is a wall that is an active structural element of a building, which holds the weight of the elements above it, by...

This impedance affects stage gain when a current source is used as an active load and affects common mode gain when the source provides the tail current...

An electrical load is an electrical component or portion of a circuit that consumes (active) electric power, such as electrical appliances and lights...

increased to allow higher fuel loads.[citation needed] More powerful RB.211-524 engines, increased wingspan, active-load-control ailerons and other improved...

gradient. Passive phloem loading transports solutes freely through plasmodesma in the symplast of the minor veins of leaves. Active transport occurs apoplastically...

if the ideal load device consumes no energy itself. Practical loads have resistance as well as inductance, or capacitance, so both active and reactive...

Extract, transform, load (ETL) is a three-phase computing process where data is extracted from an input source, transformed (including cleaning), and loaded...

Gateway Load Balancing Protocol (GLBP) is a Cisco proprietary protocol that attempts to overcome the limitations of existing first hop redundancy protocols...

double-slotted, inboard Fowler flaps. The new fly-by-wire flight controls with active load alleviation and the flexible, relatively highly loaded wing damps turbulence...

An amplifier prevents the load impedance of the following stage from affecting the characteristics of the filter. An active filter can have complex poles...

MOSFET common-source amplifier with an active load. Figure 4 shows the corresponding small-signal circuit when a load resistor RL is added at the output node...

are absorbed by active and non-active cooling surfaces. If absorbed by active surfaces then heat gains become an instant cooling load otherwise a temperature...

three types of cognitive load: Intrinsic cognitive load is the effort associated with a specific topic. Germane cognitive load refers to the work put into...

coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components...

PMC 5298601. PMID 28029119. "device doc (download)". ww1.microchip.com. "Active load modulation Finkenzeller (download)". www.rfid-handbook.de. Draft ISO/IEC...

through one active device by controlling the current in another active device of a circuit, keeping the output current constant regardless of loading. The current...

mirror (the top blue section in Fig. 3), whose output part acts as an active load. Thus the differential collector current signal is converted to a single-ended...

listed above (depending on the source and load resistances) due to the loading effect. Taking input and output loading into consideration, the closed circuit...

the person would fall on their back. An active structure consists of three integral components besides the load carrying part. They are the sensors, the...

the signal but are also used as active loads to achieve higher gain and output swing in comparison with resistive loads. CMOS technology was introduced...

the theory of the prosecution was that the defendants, by their conduct, actively induced infringement. Under U.S. copyright law, this would be a so-called...