Buffered oxide etch (BOE), also known as buffered HF or BHF, is a wet etchant used in microfabrication. It is a mixture of a buffering agent, such as ammonium...

(DRIE) Atomic layer etching (ALE) Plasma ALE Thermal ALE Wet etching Buffered oxide etch Chemical vapor deposition (CVD) Metal organic chemical vapor deposition...

to achieve good process control. For instance, buffered hydrofluoric acid (BHF) is used commonly to etch silicon dioxide over a silicon substrate. Different...

component of Wright etch and buffered oxide etch, which are used to clean silicon wafers. In a similar manner it is also used to etch glass by treatment...

season in the Arctic Barrel of oil equivalent, a unit of energy Buffered oxide etch, a mixture of ammonia and hydrofluoric acid used in microfabrication...

usually in 49% concentrated form, 5:1, 10:1 or 20:1 BOE (buffered oxide etchant) or BHF (Buffered HF). They were first used in medieval times for glass etching...

solutions of HF and buffered oxide etch, used in microfabrication etching. In these processes, bifluoride breaks down silicon oxides, doing more effectively...

fluoride is a critical component of buffered oxide etch (BOE), a wet etchant used in microfabrication. It acts as the buffering agent in a solution of concentrated...

chemically cure in areas that the curing lamp cannot penetrate Self-etch – these etch the tooth surface and do not require an intermediate bonding agent...

semiconductor surface. Their further work demonstrated how to etch small openings in the oxide layer to diffuse dopants into selected areas of the silicon...

light. 7. The polysilicon and gate oxide that is not covered by photoresist is etched away with a buffered ion etch process. This is usually an acid solution...

capacitors: Aluminum electrolytic capacitors use a high-purity etched aluminium foil with aluminium oxide as dielectric Tantalum electrolytic capacitors use a sintered...

so-called BE-MANOS [S. C. Lai, et al, NVSMW 2007]. It is suggested to add a buffer oxide in between high-K Al2O3 and SiN to improve the retention. Right now the...

and discharge rate through an active control system. Once the voltage is buffered, it is put through an inverter to supply AC power to the grid. Supercapacitors...

19th-century process known as etch-bleach. This process has also been referred to as bleach-etch, gelatin relief, or reverse relief. Etch-bleach was first documented...

on cooling; these crystals are not readily etched in the standard reactive plasmas used to pattern oxides, and will result in circuit defects in integrated...

of a pure aluminium foil with an etched surface. The aluminum forms a very thin insulating layer of aluminium oxide by anodization that acts as the dielectric...

patterned with a Cl2-based reactive ion etch. AlN is synthesized by the carbothermal reduction of aluminium oxide in the presence of gaseous nitrogen or...

hydrochloric acid, and nitric acid oxidative cleaning and etch-backs. Recent developments in research has found that oxidative cleaning with ozonated water...

with a weak acid etch, nickel strike, or a proprietary solution, if the substrate is non-metallic. After plating, an anti-oxidation or anti-tarnish chemical...

CMOS output buffers using lightly doped silicide drains are more ESD sensitive; the N-channel driver usually suffers damage in the oxide layer or n+/p...

metal nanoparticles or to a lower oxidation state oxide. These promising results show that transition-metal oxides may be useful in ensuring the integrity...

Formation of HF is a drawback, as the HF vapor is very aggressive and etches away most materials. Also, the deposited tungsten shows poor adhesion to...

silicon oxide insulators. Therefore scientists are looking for new ways to reduce the diffusion of copper into silicon substrates without using the buffer layer...

Self-aligned litho-etch-litho-etch (SALELE) is a hybrid SADP/LELE technique whose implementation has started in 7 nm. Self-aligned litho-etch-litho-etch (SALELE)...

electrochemically etched (roughened) aluminium foil as an anode with aluminium oxide (Al2O3) as the dielectric The properties of the aluminium oxide layer compared...

graphene-quartz substrate. A repeated transfer-and-etch process was used to control surface resistivity. Graphene oxide can be reversibly reduced and oxidized via...

as an ornamental stone, a concrete aggregate, and a source of magnesium oxide, as well as in the Pidgeon process for the production of magnesium. It is...

process. Zinc accomplishes this by combining readily with oxygen to form zinc oxide. Amalgam restorations made from this balanced formula were reasonably successful...

the mold to prevent sticking, and to trap any slag particles—including oxide particles or scale—that may be present in the metal and bring them to the...