• Thumbnail for Drawbar (machine tool)
    A drawbar or spindle drawbar is a clamping mechanism for toolholders on machine tools. The toolholder or machine taper itself is held by the draw bar and...
    4 KB (543 words) - 17:59, 28 March 2025
  • building Drawbar (haulage), a device for coupling a hauling vehicle to a load Drawbar (machine tool), a device for securing tools e.g. in milling machines A...
    560 bytes (114 words) - 21:30, 15 July 2021
  • Thumbnail for Machine taper
    exercised in the usual drilling machine or lathe situation, which provides no drawbar to pull the taper into engagement, if a tool is used requiring a high torque...
    42 KB (5,187 words) - 17:30, 25 June 2025
  • A drawbar force gauge is a gauge designed to measure forces on a machine tool's drawbar. These types of machines are found in metalworking, woodworking...
    5 KB (626 words) - 14:26, 29 March 2025
  • Thumbnail for Milling (machining)
    larger manual machines usually use NMTB tooling. This tooling is somewhat similar to CAT tooling but requires a drawbar within the milling machine. Furthermore...
    59 KB (7,806 words) - 14:54, 16 June 2025
  • Thumbnail for Harrow (tool)
    always tractor-mounted implements, either trailed after the tractor by a drawbar or mounted on the three-point hitch. A modern development of the traditional...
    10 KB (1,245 words) - 17:38, 1 June 2025
  • Thumbnail for Tractor
    Tractor (section Drawbars)
    tillage equipment are most commonly connected to the tractor via a drawbar. The classic drawbar is simply a steel bar attached to the tractor (or in some cases...
    84 KB (10,203 words) - 02:11, 6 July 2025
  • Thumbnail for Collet
    Collet (category Machine tools)
    Collets are compressed by a drawbar from behind, they are self releasing and tool changes can be automated. Unlike most other machine collet systems, 5C collets...
    21 KB (2,916 words) - 07:07, 1 May 2025
  • Thumbnail for Chuck (engineering)
    the collet's male outer taper, or a sleeve that will hold it. A hollow drawbar passes back through the headstock to its back side, where a closer mechanism...
    33 KB (4,301 words) - 03:38, 5 July 2025
  • Thumbnail for Caterpillar D6
    slabs of steel to add weight to the rear of the machine to aid in heavy dozing applications. A drawbar and CCU (Cable control unit) for pulling towed scrapers...
    5 KB (741 words) - 17:03, 22 March 2025
  • Thumbnail for Cultivator
    Cultivator (category Gardening tools)
    attached by means of a three-point hitch and driven by a power take-off . Drawbar hookup is also still commonly used worldwide. Draft-animal power is sometimes...
    17 KB (2,283 words) - 14:45, 25 June 2025
  • Thumbnail for Tom Morello
    Tom Morello (category Rage Against the Machine members)
    Morello is featured on Linkin Park's album The Hunting Party on the song "Drawbar", released on June 17, 2014. Morello plays the guitar solo of the song...
    95 KB (9,889 words) - 18:20, 16 July 2025
  • Thumbnail for Agricultural machinery
    their low gear ratios, they could provide a large drawbar pull. The slow speed of steam-powered machines led farmers to comment that tractors had two speeds:...
    18 KB (1,937 words) - 11:08, 26 May 2025
  • Thumbnail for IDF Caterpillar D9
    bulldozers in IDF service, has a power of 405–410 horsepower (302–306 kW) and drawbar pull of 71.6 metric tons (about 702 kN). Older generations, such as D9L...
    27 KB (2,740 words) - 02:01, 14 July 2025
  • Instead of physical drawbars, the Organ section features "drawbuttons" with a set of red LED strips to indicate the position of each drawbar from 0 (fully in)...
    24 KB (2,395 words) - 22:49, 6 July 2025
  • Thumbnail for Armored bulldozer
    IDF service, has a power of 405 to 410 horsepower (302 to 306 kW) and drawbar pull of 71.6 tonnes-force (702 kN). It has a crew of two, an operator and...
    12 KB (1,322 words) - 08:23, 9 April 2025
  • Thumbnail for Oliver Farm Equipment Company
    National Museum of American History. It produced 18 horsepower at the drawbar and 30 at the belt. The tractor at the Smithsonian was used at the George...
    33 KB (4,464 words) - 21:59, 23 June 2025
  • Thumbnail for Caterpillar D9
    primarily in the design of their internal systems. The D9's primary working tools are the blade, affixed to the front and controlled by four hydraulic cylinders...
    12 KB (1,421 words) - 17:04, 12 March 2025
  • Thumbnail for Ford N-series tractor
    row-crop work they needed. The 9N weighed 2,340 pounds (1,060 kg) and had 13 drawbar horsepower, which could pull a two-bottom plow. It was designed to be safe...
    19 KB (2,367 words) - 22:50, 20 March 2025
  • Thumbnail for Ferguson TE20
    of agricultural tasks previously performed either by separate machines, unwieldy drawbar-mounted trailed equipment, or manual labour. The TE and TO 20...
    23 KB (3,078 words) - 16:29, 10 July 2025
  • the song "Rebellion" and Tom Morello of Rage Against the Machine fame on the song "Drawbar". Bennington commented on the collaborations, stating that...
    80 KB (6,777 words) - 02:55, 3 July 2025
  • Thumbnail for Tom Morello discography
    playing guitar in the mid 80's in the band Electric Sheep together with future Tool guitarist Adam Jones on bass. After graduating cum laude from Harvard University...
    45 KB (1,907 words) - 13:00, 2 July 2025
  • Thumbnail for Camel Trophy
    Avon) Expedition tools, Jerry cans, Pelican cases, Zarges boxes, high lift or New Concept air jacks, sand ladders, axes, ropes, drawbars, spades. Garmin...
    14 KB (1,028 words) - 04:03, 26 May 2025
  • Thumbnail for Music technology
    Music technology is the study or the use of any device, mechanism, machine or tool by a musician or composer to make or perform music; to compose, notate...
    64 KB (8,476 words) - 01:10, 16 July 2025
  • Thumbnail for MIDI controller
    Influence Archived 2012-01-10 at the Wayback Machine". Sound On Sound. SOS Publications. Oct 2001. Print. ""Drawbar Manual v. 1.2". Voce, Inc. n.d. Web. 10...
    25 KB (2,924 words) - 05:45, 24 June 2025
  • Thumbnail for M1120 HEMTT Load Handling System
    a secondary frame supporting the front axle on a turning table and the drawbar; a steering lock allows the steering to be fixed when required. Two axles...
    21 KB (1,863 words) - 06:52, 14 April 2025
  • Thumbnail for Plough
    Plough (category Farming tools)
    A plough or (US) plow (both pronounced /plaʊ/) is a farm tool for loosening or turning the soil before sowing seed or planting. Ploughs were traditionally...
    69 KB (9,219 words) - 17:10, 28 June 2025
  • Thumbnail for Pennsylvania Railroad class S1
    boiler for Union Pacific's 4000-class "Big Boy" locomotives. In terms of drawbar horsepower, the S1 was 13% more powerful than the Big Boy, with 7,200 hp...
    36 KB (4,836 words) - 09:26, 29 May 2025
  • Thumbnail for Skidding (forestry)
    Skidding (forestry) (category Forestry tools)
    easier terrain, the fardier (or trinqueballe; a horse-drawn machine with 2 braked wheels, a drawbar and a winch) enables 2 or 3 horses to lift and pull logs...
    13 KB (1,730 words) - 19:33, 8 July 2024
  • Thumbnail for Linkin Park
    Chad (May 3, 2015). "Watch Tom Morello Collaborate With Linkin Park on 'Drawbar'". Loudwire. Archived from the original on January 9, 2024. Retrieved February...
    236 KB (18,077 words) - 15:44, 9 July 2025