An elastic modulus (also known as modulus of elasticity (MOE)) is a quantity that describes an object's or substance's resistance to being deformed elastically...

Young's modulus (or the Young modulus) is a mechanical property of solid materials that measures the tensile or compressive stiffness when the force is...

elasticity of a material is quantified by the elastic modulus such as the Young's modulus, bulk modulus or shear modulus which measure the amount of stress needed...

describing the stress-strain relation in a linear elastic material. Other names are elastic modulus tensor and stiffness tensor. Common symbols include...

section modulus, elastic and plastic: The elastic section modulus is used to calculate a cross-section's resistance to bending within the elastic range...

elastic modulus, these properties are known as the upper-bound modulus, corresponding to loading parallel to the fibers; and the lower-bound modulus,...

In materials science, shear modulus or modulus of rigidity, denoted by G, or sometimes S or μ, is a measure of the elastic shear stiffness of a material...

hardness test. Using linear elastic indentation hardness, a relation between the ASTM D2240 hardness and the Young's modulus for elastomers has been derived...

In mechanics, the flexural modulus, bending modulus, or modulus of rigidity is an intensive property that is computed as the ratio of stress to strain...

additional elastic modulus, for example the shear modulus, is needed to determine wave speeds. It is possible to measure the bulk modulus using powder...

An alternative form is obtained noting that the elastic modulus is related to the long term modulus by G ( t = 0 ) = G 0 = G ∞ + ∑ i = 1 N G i {\displaystyle...

These force-bearing materials require high elastic modulus with low deflection. As the elastic modulus of material increases, fracture resistance decreases...

be described with the following material properties: Young's Modulus, the shear modulus, and the Poisson's ratio, in relatively simple mathematical relationships...

Bulk modulus, a measure of compression resistance Elastic modulus, a measure of stiffness Shear modulus, a measure of elastic stiffness Young's modulus, a...

{\frac {A}{L}}} where E {\displaystyle E} is the (tensile) elastic modulus (or Young's modulus), A {\displaystyle A} is the cross-sectional area, L {\displaystyle...

written as: specific modulus = E / ρ {\displaystyle {\text{specific modulus}}=E/\rho } where E {\displaystyle E} is the elastic modulus and ρ {\displaystyle...

The elastic modulus (Young's modulus) of a filled polymer can be found using the equation below: E = E0 (1 + 2.5Φ + 14.1Φ2) where: E0 = Modulus of unfilled...

increase in the macroscopic modulus. Moreover, at constant frequency, an increase in temperature results in a reduction of the modulus due to an increase in...

of the stress-strain curve, the tangent modulus is equal to the elastic modulus). Plots of the tangent modulus of elasticity for a variety of materials...

to the elastic modulus of the material. Elastic limit (yield strength) Beyond the elastic limit, permanent deformation will occur. The elastic limit is...

wavelengths, can be used to determine the mechanical modulus of film materials. The elastic modulus significantly impacts the applications of organic semiconductors;...

different in highly skewed distributions. Modulus of elasticity An elastic modulus (also known as modulus of elasticity) is a quantity that measures...

{\displaystyle E_{f}} are the elastic moduli of the matrix and fibers respectively. The other extreme case of the elastic modulus of the composite with the...

Dynamic modulus (sometimes complex modulus) is the ratio of stress to strain under vibratory conditions (calculated from data obtained from either free...

called moduli. The elastic properties can be well-characterized by the Young's modulus, Poisson's ratio, Bulk modulus, and Shear modulus or they may be described...

{\sigma }{\eta }}+{\frac {1}{E}}{\frac {d\sigma }{dt}}} where E is the elastic modulus and η is the material coefficient of viscosity. This model describes...

transverse direction, an elastic modulus of 8.92–10.02 GPa was reported. For the longitudinal and radial orientations, the elastic modulus was 7.19–8.23 and...

titanium alloys. The latter possess enhanced biocompatibility, reduced elastic modulus, and superior strain-controlled and notch fatigue resistance. However...

corner (90°) tip is 2.598. The reduced modulus E r {\displaystyle E_{\text{r}}} is related to Young's modulus E s {\displaystyle E_{\text{s}}} of the...

portion of the curve is the elastic region, and the slope of this region is the modulus of elasticity or Young's modulus. Plastic flow initiates at the...