Interfacial polymerization is a type of step-growth polymerization in which polymerization occurs at the interface between two immiscible phases (generally...

A nanoparticle interfacial layer is a well structured layer of typically organic molecules around a nanoparticle. These molecules are known as stabilizers...

Menachem Elimelech. “Fabrication of desalination membranes by interfacial polymerization: history, current efforts, and future directions.” Royal Society...

non-covalent polymerization in supramolecular chemistry is highly dependent on the interactions during the self-assembly process. The degree of polymerization depends...

In polymer chemistry, living polymerization is a form of chain growth polymerization where the ability of a growing polymer chain to terminate has been...

determined by solving the Young's equation for the interfacial force balance. At equilibrium three interfacial tensions corresponding to solid/gas (γSG), solid/liquid...

suspension polymerization have diameters usually exceeding 10 μm. In polymer chemistry, suspension polymerization is a heterogeneous radical polymerization process...

polymeric nanoparticles include microfluidic approaches, electrodropping, high pressure homogenization, and emulsion-based interfacial polymerization...

nylon 610 polymer forms as a flexible film at the interface of the water and cyclohexane layers, in an example of an interfacial polymerization. The experimentalist...

Condensed polymer walls form instantaneously at the interface of the emulsion droplets. Interfacial cross-linking is derived from interfacial polycondensation...

In polymer chemistry, in situ polymerization is a preparation method that occurs "in the polymerization mixture" and is used to develop polymer nanocomposites...

Atom transfer radical polymerization (ATRP) is an example of a reversible-deactivation radical polymerization. Like its counterpart, ATRA, or atom transfer...

polymer network of polyacrylamide and a triarylphosphine formed by interfacial polymerization: The combustion of propane was demonstrated to occur at temperatures...

particularly high flux and low salt passage could be made by interfacial polymerization of m-phenylene diamine and trimesoyl chloride. Cadotte's patent...

well as soften the electrolyte for improved interfacial contact. The matrix of GPEs consist of a polymer network swollen in a solvent that contains the...

Interfacial rheology is a branch of rheology that studies the flow of matter at the interface between a gas and a liquid or at the interface between two...

acid and sulfuric acid, with the purpose of improving the interfacial bonding between the polymers and the conductive fillers. The shape-memory effect in...

carbon nanotube loading due to viscosity increases. In-situ polymerization can be used for polymers that are not solvent or heat compatible. In this method...

of interfacial polycondensation. The procedure is applied to the commercial production of bisphenol-A-based polyarylates like Unitika's U-Polymer. Water...

fraction of each polymer, and x is the number of segments of each polymer. x1 and x2 increase with higher degrees of polymerization and thus molecular...

widely used in many different applications such as measuring the interfacial tension of polymer blends and copolymers. An approximate theory was developed by...

through the collodion, it is coated with a membrane thanks to the interfacial polymerization properties of the collodion. The cell later settles into paraffin...

In surface science, surface energy (also interfacial free energy or surface free energy) quantifies the disruption of intermolecular bonds that occurs...

water have been prepared via ring opening metathesis polymerization. These water-soluble polymers or conjugated poly electrolytes (CPEs) also can be used...

theoretical viewpoint, the zeta potential is the electric potential in the interfacial double layer (DL) at the location of the slipping plane relative to a...

soap that may lower the interfacial tension enough to increase production. Injection of a dilute solution of a water-soluble polymer to increase the viscosity...

which consist of a number of extremely thin selective layers interfacially polymerized over a microporous substrate, have had commercial success in industrial...

polymerization: Emulsion polymerization in which the starting system is a micro-emulsion and the final latex comprises colloidal particles of polymer...

charged amino acid at the surface, which would create an interfacial potential). Interfacial potential is responsible for the formation of the electric...

; Katz, Howard E. (2012). "Next-Generation Polymer Solar Cell Materials: Designed Control of Interfacial Variables". ACS Nano. 6 (4): 2865–70. doi:10...