GS1-128 GS1 DataBar GS1 DataMatrix GS1 Digital Link GS1 EDI ITF-14 Low-Level Reader Protocol (LLRP) Object Name Service (ONS) Serial Shipping Container Code...

numbers used by protocols for operation of network applications. The Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP) only need...

"Comparative analysis of authentication techniques to Secure Low Level Reader Protocol (LLRP) connection". 2014 31st National Radio Science Conference...

at a high voltage. The high signaling level of 5 VDC is used to accommodate long cable runs from card readers to the associated access control panel...

(ECI) is an extension to the communication protocol that is used to transmit data from a bar code reader to a host when a bar code symbol is scanned...

such as communicating with a NFC front end by the Single Wire Protocol (SWP). On the reader side, EMV requires making a warm ATR for cards with TB1 other...

MHz) and low frequency (125/134 kHz) proximity cards and allows users to read, emulate, fuzz, and brute force the majority of RFID protocols. Originally...

the layered architecture of protocols in the network stack in the Internet protocol suite and the OSI model. The protocols of this layer provide end-to-end...

RuBee (IEEE standard 1902.1) is a two-way active wireless protocol designed for harsh environments and high-security asset visibility applications. RuBee...

The Open Systems Interconnection protocols are a family of information exchange standards developed jointly by the ISO and the ITU-T. The standardization...

ccTalk is a serial protocol in widespread use throughout the money transaction and point-of-sale industry. Peripherals such as the currency detectors for...

limiting if you need to manipulate the CAN protocol at a finer level or perform custom tasks that require low-level control. For example, when using a transceiver...

communication protocol; merely an electrical interface. Although many applications use RS-485 signal levels, the speed, format, and protocol of the data...

other at the same time in an authentication protocol. It is a default mode of authentication in some protocols (IKE, SSH) and optional in others (TLS). Mutual...

from card-reader/printer terminals. Early RJE workstations were "dumb" (non-programmable) devices using byte-synchronous communications protocols such as...

Bluetooth protocols MyriaNed Near-field communication NearLink RuBee – secure wireless protocol alternative Tethering Thread (network protocol) Wi-Fi HaLow Zigbee –...

Networking (SONET) and Synchronous Digital Hierarchy (SDH) are standardized protocols that transfer multiple digital bit streams synchronously over optical...

Border Gateway Protocol (BGP) is a standardized exterior gateway protocol designed to exchange routing and reachability information among autonomous systems...

internetworking protocol suites; it was created by researchers at Xerox PARC in the mid-1970s. (Technically, the name PUP only refers to the internetwork-level protocol...

Server Message Block (SMB) is a communication protocol used to share files, printers, serial ports, and miscellaneous communications between nodes on a...

architecture, in particular the physical interfaces, and communication protocols to and from hosts, such as personal computers, to and from peripheral...

low High voltage is +7 V Decision point is +3.5 V Message length is restricted to 12 bytes, including CRC Employs CSMA/NDA ISO 9141-2 This protocol has...

System to Intermediate System (IS-IS, also written ISIS) is a routing protocol designed to move information efficiently within a computer network, a group...

communication protocols that enables communication between two electronic devices over a distance of 4 cm (1+1⁄2 in) or less. NFC offers a low-speed connection...

format), or using a new protocol variant that runs on top of ISO 7816-4. This way the cards become compatible with NFC reader APIs that can only exchange...

and IKEv2) is the protocol used to set up a security association (SA) in the IPsec protocol suite. IKE builds upon the Oakley protocol and ISAKMP. IKE uses...

nodes, providing abstraction from low-level division into protocol data units, and enabling higher-level protocols to operate transparently. An alternative...

deployment of components, large-grain data transfer, and a low entry-barrier for content readers, content authors and developers. The constraints of the...

pure wire-protocol level specification and does not go into any socket API or implementation specifics. The purpose of the Sockets Direct Protocol is to provide...

of TLS is that it is application protocol independent. Higher-level protocols can layer on top of the TLS protocol transparently. The TLS standard, however...