A minimum detectable signal is a signal at the input of a system whose power allows it to be detected over the background electronic noise of the detector...

the minimum detectable signal level at the input of a receiver, which can be calculated through a knowledge of the noise figure and the input signal bandwidth...

company Mohawk Data Sciences Corporation, a computer company Minimum detectable signal, a measure of sensitivity Molybdenum disulfide, a compound added...

unable to fully receive the desired signal. Typical receiver operation is such that the Minimum Detectable Signal (MDS) level is determined by the thermal...

Distortion List of radios – List of specific models of radios Minimum detectable signal Radio transmitter design Radio receiver design Radiogram (furniture)...

overt-the-air broadcasts or cable signals.[citation needed] Wikimedia Commons has media related to Hi-Fi tuners. Minimum detectable signal Radio scanner "Marantz...

The sensitivity of a system may be taken as the "minimum detectable signal". This is that level of signal that exceeds a threshold value by a suitable margin...

The minimum intelligent signal test, or MIST, is a variation of the Turing test proposed by Chris McKinstry in which only boolean (yes/no or true/false)...

transmission (with a jam signal instead of frame header/data/CRC) until minimum packet time is reached to ensure that all receivers detect the collision. Increment...

\!} = array of spatial frequencies Minimum detectable temperature difference (MDTD), also called minimum detectable temperature (MDT), is not the same...

as a PIN diode, is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other...

sensing (RPS) instrument are the minimum detectable particle size and the dynamic range of the instrument. The minimum detectable size is determined by the volume...

modulation or message signal onto a carrier signal to be transmitted. For example, the message signal might be an audio signal representing sound from...

Rotation rate: 6-25 deg/s under typical scanning (30 deg/s max) Minimum Detectable Signal: -112 dBm Radar Sensitivity: -15 dBZ at 50 km Noise Figure: 3 dB...

SNR means that the signal is clear and easy to detect or interpret, while a low SNR means that the signal is corrupted or obscured by noise and may be difficult...

make otherwise difficult-to-detect objects easier to detect. Corner reflectors on boats, for example, make them more detectable to avoid collision or during...

minimum distance. A minimum detectable object is the smallest object the sensor can detect. More accurate sensors can often have minimum detectable objects...

Traffic lights, traffic signals, or stoplights – also known as robots in South Africa, Zambia, and Namibia – are signaling devices positioned at road intersections...

Earth-mass planets are currently detectable only in very small orbits around low-mass stars, e.g. Proxima b. It is easier to detect planets around low-mass stars...

order for a stimulus to be detected with high probability, its level of strength must exceed the absolute threshold; if a signal does reach threshold, the...

code, the minimum Hamming distance is 3, which satisfies 2k+1 = 3. Thus a code with minimum Hamming distance d between its codewords can detect at most...

a passband (a band-pass filtered signal) is the portion of the frequency spectrum that is transmitted (with minimum relative loss or maximum relative...

filter dictates the resolution bandwidth, which is related to the minimum bandwidth detectable by the instrument. As demonstrated by the animation to the right...

safety margin between the received power and minimum power required by the receiver to accurately detect the signal. The link margin is chosen based on the...

In mathematics and signal processing, an analytic signal is a complex-valued function that has no negative frequency components.  The real and imaginary...

In signal processing, multidimensional empirical mode decomposition (multidimensional EMD) is an extension of the one-dimensional (1-D) EMD algorithm to...

random-error-correcting code based on minimum distance coding can provide a strict guarantee on the number of detectable errors, but it may not protect against...

GPS signals are broadcast by Global Positioning System satellites to enable satellite navigation. Using these signals, receivers on or near the Earth's...

below this threshold are not detectable and are considered subliminal. Stimuli at values close to a threshold may be detectable on some occasions; therefore...

radio-frequency electromagnetic signal reflected from a target to determine information about that target. In any radar system, the signal transmitted and received...