Network Control Program might refer to: Network Control Program (ARPANET), the software in hosts which implemented the original protocol suite of the...

and the pre-existing acronym 'NCP' (which originally referred to Network Control Program, the software that implemented this stack) was organically adopted...

The IBM Network Control Program, or NCP, was software that ran on a 37xx communications controller and managed communication with remote devices. NCP...

part of the Point-to-Point Protocol Network Control Program (ARPANET), the software which implements the Network Control Protocol of the ARPANET This disambiguation...

The Satellite Control Network (SCN), operated by the United States Space Force's Space Delta 6, provides support for the operation, control, and maintenance...

Projects Agency Network (ARPANET) was the first wide-area packet-switched network with distributed control and one of the first computer networks to implement...

Sports Programming Network) is an American international basic cable sports channel owned by the Walt Disney Company (80% and operational control) and Hearst...

supported by IBM 3704/3705 communication controllers and their Network Control Program (NCP), and by System/370 and their VTAM and other software such...

A programmable logic controller (PLC) or programmable controller is an industrial computer that has been ruggedized and adapted for the control of manufacturing...

Network Admission Control (NAC) refers to Cisco's version of network access control, which restricts access to the network based on identity or security...

Stored program control (SPC) is a telecommunications technology for telephone exchanges. Its characteristic is that the switching system is controlled by...

Kahn, which defined the transmission of messages to an IMP. The Network Control Program (NCP) for the ARPANET, developed by Steve Crocker and other graduate...

This is a list of television programs currently or formerly broadcast by Cartoon Network in the United States. The network was launched on October 1, 1992...

that was airing, or to promote upcoming programming. In 1995, Liberty Media purchased a 50% stake in the network as part of their alliance with News Corporation...

Steve Crocker established a "Networking Working Group" which developed a host-host protocol, the Network Control Program (NCP). In the early 1970s, DARPA...

by GMA Network Inc. Headquartered on GMA Network Center in Diliman, Quezon City. The following is a list of original programming by GMA Network, since...

engineering, inversion of control (IoC) is a design principle in which custom-written portions of a computer program receive the flow of control from an external...

Electronic stability control (ESC), also referred to as electronic stability program (ESP) or dynamic stability control (DSC), is a computerized technology...

utilities along with the master control program, the kernel. The kernel provides services to start and stop programs, handles the file system and other...

League. It became the third sports-oriented cable network devoted to programming from and controlled by one of the Major professional sports leagues in...

Kleinrock's at UCLA, developed the host-to-host protocol, the Network Control Program, which was approved by Barry Wessler for ARPA, after he ordered...

a network protocol used in Novell NetWare Network Control Protocol (ARPANET), the original protocol suite of the ARPANET Network Control Program (ARPANET)...

international markets, but these do not necessarily air the same programming as the U.S. network. Most viewers in Canada have access to at least one U.S.-based...

Computer network programming involves writing computer programs that enable processes to communicate with each other across a computer network. Very generally...

Architecture for Control Networks (ACN) is a suite of network protocols for control of entertainment technology equipment, particularly as used in live...

rights to specific system objects such as programs, processes, or files. These entries are known as access-control entries (ACEs) in the Microsoft Windows...

The Ground Wave Emergency Network (GWEN) was a US Air Force command and control communications system, deployed briefly between 1992 and 1994, intended...

and Vint Cerf, in designing a host-host protocol known as the Network Control Program (NCP). They planned to use separate protocols, Telnet and the File...

(an acronym for supervisory control and data acquisition) is a control system architecture comprising computers, networked data communications and graphical...

Chinese Web sites Initial Connection Protocol, of the ARPANET Network Control Program International Cataloguing Principles, revision of Paris Principles...