A printed circuit board (PCB), also called printed wiring board (PWB), is a laminated sandwich structure of conductive and insulating layers, each with...

Printed circuit board milling (also: isolation milling) is the milling process used for removing areas of copper from a sheet of printed circuit board...

Printed circuit board manufacturing is the process of manufacturing bare printed circuit boards (PCBs) and populating them with electronic components....

Eurocard is an IEEE standard format for printed circuit board (PCB) cards that can be plugged together into a standard chassis which, in turn, can be...

used for rigid printed circuit boards, allowing the board to conform to a desired shape, or to flex during its use. Flexible printed circuits (FPCs) are made...

419, was filed in 1967 and refers to a particular printed circuit board layout as a Printed Circuit Breadboard. Both examples refer to and describe other...

substrate or printed circuit board (PCB). A PCB having components on a Printed wiring board (PWB) is not considered a true hybrid circuit according to...

mainboard, a system board, a logic board, and informally a mobo (see "Nomenclature" section), is the main printed circuit board (PCB) in general-purpose...

traces that run out of the die, through the package, and into the printed circuit board (PCB) have very different electrical properties compared to on-chip...

integrate all their functions onto a single printed circuit board. Unlike a desktop personal computer, single-board computers often do not rely on expansion...

substrate (a printed circuit board or PCB) and solder the components to these interconnections to create a finished circuit. In an integrated circuit or IC,...

format for printed circuit board (PCB) designs. It is the de facto standard used by PCB industry software to describe the printed circuit board images: copper...

manufacturing of electronic printed circuit boards. A flying probe tester uses one or more test probes to make contact with the circuit board under test; the probes...

Automated optical inspection (AOI) is an automated visual inspection of printed circuit board (PCB) (or LCD, transistor) manufacture where a camera autonomously...

pushing". Interconnects (integrated circuits) Physical design (electronics) Printed circuit board Integrated circuit design Floorplan (microelectronics)...

contexts: Printed circuit boards, during which components are graphically placed on the board and the wires drawn between them Integrated circuits, during...

This results in the final layout artwork for the integrated circuit or printed circuit board. A generalized design flow may be as follows: Schematic → schematic...

unit as a whole. This type of switch is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize...

particular MegaSquirt without knowing three things: microcontroller, printed circuit board and firmware versions. As for the commercial/refined MS3Pro and...

integration onto a printed circuit board, most dies are packaged in various forms. Most dies are composed of silicon and used for integrated circuits. The process...

A single-board microcontroller is a microcontroller built onto a single printed circuit board. This board provides all of the circuitry necessary for a...

industry are Verilog and VHDL. Several projects exist for defining printed circuit board connectivity using language based, textual-entry methods. Among...

In microstrip antennas and printed monopole antennas an area of copper foil on the opposite side of a printed circuit board serves as a ground plane. The...

Unimicron Technology Corporation (Unimicron; TWSE: 3037) is a printed circuit board (PCB) manufacturer headquartered in Taiwan. The company produces PCBs...

location of a component within an electrical schematic or on a printed circuit board. The reference designator usually consists of one or two letters...

electrical components are mounted directly onto the surface of a printed circuit board (PCB). An electrical component mounted in this manner is referred...

In electronics, a signal trace or circuit trace on a printed circuit board (PCB) or integrated circuit (IC) is the equivalent of a wire for conducting...

are attached (wired, bonded directly) to a printed circuit board, and covered by a blob of epoxy. Chip on board eliminates the packaging of individual semiconductor...

TTM Technologies, Inc. is an American printed circuit board (PCB) manufacturer headquartered in Santa Ana, California. Founded in 1998, the company is...

pour refers to an area on a printed circuit board filled with copper (the metal used to make connections in printed circuit boards). Copper pour is commonly...