A router plane is a hand plane used in woodworking for smoothing out sunken panels, and more generally for all depressions below the general surface of...

consider the router one of the most versatile power tools. There is also a traditional hand tool known as a router plane, a form of hand plane with a broad...

In network routing, the control plane is the part of the router architecture that is concerned with establishing the network topology, or the information...

shoulder plane, router plane, bullnose plane, and chisel plane, among others. Electrically powered hand planers (loosely referred to as power planes) have...

In routing, the data plane, sometimes called the forwarding plane or user plane, defines the part of the router architecture that decides what to do with...

computers had fundamentally the same functionality as a router does today. The idea for a router (called a gateway at the time) initially came about through...

Look up router in Wiktionary, the free dictionary. Router may refer to: Router (computing), a computer networking device Router (woodworking), a rotating...

A CNC wood router is a CNC router tool that creates objects from wood. CNC stands for computer numerical control. The CNC works on the Cartesian coordinate...

A router table is a stationary woodworking machine in which a vertically oriented spindle of a woodworking router protrudes from the machine table and...

bench Suitable hand planes: a plough plane for the groove and a tongue plane for the tongue, or a combination plane A spindle router Tongue in groove is...

A jack plane is a general-purpose woodworking bench plane, used for dressing timber down to size in preparation for truing and/or edge jointing. It is...

The rebate plane (British English) or rabbet plane (American English) is a hand plane designed for cutting rebates/rabbets in wood. It is a simple tool...

A smoothing plane or smooth plane is a type of bench plane used in woodworking. The smoothing plane is typically the last plane used on a wood surface...

is some geometrically important part of an object—such as a point, line, plane, hole, set of holes, or pair of surfaces—that serves as a reference in defining...

shaper) hand saw and chisel router plane grooving plane Dado (joinery) Tongue and groove Woodworking joints Reed, Carol (2003). Router Joinery Workshop: Common...

horizontal plane, and another reading is noted. If the level is accurate, it will indicate the same orientation with respect to the horizontal plane. A difference...

composites. This particleboard could be produced with waste products such as planer shavings, off-cuts, or sawdust, hammer-milled into chips and bound together...

smaller scale, the hand-held or table-mounted electric router allows the use of interchangeable router bits of a wide variety of profiles and is readily available...

surface appearance or figure, growth-ring placement (e.g., vertical grain), plane of the cut (e.g., end grain), rate of growth (e.g., narrow grain), and relative...

vitae logs are a crafting material commonly used by carpenters. A hand plane with a lignum vitae sole, likely not actual Guaiacum but Bulnesia, and a...

can be used as a shaper, a disk or drum sander, a grinder, a surface planer, a router, a horizontal boring machine and even as a power unit for a lathe;...

produce true plane surfaces but a "ball and socket" concave-concave and convex-convex fit, as this mechanical fit, like two perfect planes, can slide over...

large sander similar in concept to a planer, but much larger. Uses a large sanding belt head instead of a planer's shaping head, and requires air from...

translation of the tool with respect to the workpiece. Typically a finger router bit is used, but spindle moulders can also be used. Manual cutting of finger...

tops. Special tools such as chamfer mills, chamfer planes, an chamfer bits in shapers and routers are sometimes used to ease edges. Chamfers are commonly...

computer numerical control (CNC) router is a computer-controlled cutting machine which typically mounts a hand-held router as a spindle which is used for...

side planer Four sided planer or timber sizer Drill press Drum sander Bench grinder Jointer Wood lathe Mortiser Panel saw Pin router or Overhead Router Radial...

acquired in 2004/2005 Oldham Saw Company – circular saw blade and wood router bit products; B & D acquired in 2004 Black+Decker – acquired (via merger)...

The jointer plane, also known as the try plane or trying plane, is a type of hand plane used in woodworking to straighten the edges of boards in the process...

Plane is a 2023 American action thriller film directed by Jean-François Richet from a screenplay by Charles Cumming and J. P. Davis. Starring Gerard Butler...