The shear vane test is a method of measuring the undrained shear strength of a cohesive soil. The test is carried out with equipment consisting of a rod...

In most cases, the rupture speed approaches, but does not exceed, the shear wave (S wave) velocity of the surrounding rock. There are a few exceptions...

Thixotropy is a time-dependent shear thinning property. Certain gels or fluids that are thick or viscous under static conditions will flow (become thinner...

ratio (CBR) Permeability tests (constant-head, falling-head, etc.) Vane shear test Common mineral soil contaminants include arsenic, barium, cadmium,...

series Screw plate test Deformation monitoring Inclinometer Settlement recordings Shear vane test Simple sounding Standard penetration test Total sounding...

are often determined using some combination of field tests (e.g., aquifer tests) and laboratory tests on aquifer material samples. Recently, these properties...

series Screw plate test Deformation monitoring Inclinometer Settlement recordings Shear vane test Simple sounding Standard penetration test Total sounding...

series Screw plate test Deformation monitoring Inclinometer Settlement recordings Shear vane test Simple sounding Standard penetration test Total sounding...

A sieve analysis (or gradation test) is a practice or procedure used in geology, civil engineering, and chemical engineering to assess the particle size...

also able to measure pore water pressure. The shear vane test is used to determine the undrained shear strength of soft to medium cohesive soils. This...

stability, and a narrow stem with graduations for measuring. The liquid to test is poured into a tall container, often a graduated cylinder, and the hydrometer...

the laboratory using direct shear test, triaxial shear test, simple shear test, fall cone test and (hand) shear vane test; there are numerous other devices...

monitoring wells or piezometers. Samples collected from boreholes are often tested in a laboratory to determine their physical properties, or to assess levels...

series Screw plate test Deformation monitoring Inclinometer Settlement recordings Shear vane test Simple sounding Standard penetration test Total sounding...

excavation depth. Slurry wall design is undertaken based on bending moment and shear envelope obtained from the stress analysis. In the design of such underground...

Laboratory tests using soil samples subjected to hydraulic experiments Field tests (on site, in situ) that are differentiated into: small-scale field tests, using...

stretched clay lumps (a phenomenon called boudinage) and zones of concentrated shear. Debris flow deposits take the form of long, narrow tracks of very poorly...

amplitude shear strain. This is a soil test-based definition, usually performed via cyclic triaxial, cyclic direct simple shear, or cyclic torsional shear type...

easily identified using X-ray diffraction rather than chemical or physical tests. Varve (or varved clay) is clay with visible annual layers that are formed...

Equivalent rate of rotation when measuring the undrained shear strength using the mini shear vane test. A summary of different existing standards is shown...

non-invasive technique, which is widely used in practice to detect the shear wave velocity profile of the soil. The SASW method relies on the dispersive...

series Screw plate test Deformation monitoring Inclinometer Settlement recordings Shear vane test Simple sounding Standard penetration test Total sounding...

 631. ISBN 0136427103. "ISO 14688-1:2002 – Geotechnical investigation and testing – Identification and classification of soil – Part 1: Identification and...

This is essentially due to a decrease in the shear strength of the slope material, an increase in the shear stress borne by the material, or a combination...

symbol ϕ {\displaystyle \phi } usually represents the angle of shearing resistance, a shear strength (soil) parameter. Because of this, in soil science and...

characteristics Multiphase fluid flow in porous media Florida Method of Test For Concrete Resistivity as an Electrical Indicator of its Permeability Archived...

tests measure the "accessible void", the total amount of void space accessible from the surface (cf. closed-cell foam). There are many ways to test porosity...

the vadose zone to be deposited in pore space. ASTM American Standard of Testing Materials: 200 sieve – 0.005 mm. USDA United States Department of Agriculture...

S., and Garambois, S. (2015). "Borehole seismoelectric logging using a shear-wave source: Possible application to CO2 disposal?." International Journal...

also commonly used. From the Annual Book of ASTM (American Society for Testing and Materials) Standards, the total evaporable moisture content in Aggregate...