Soldering (US: /ˈsɒdərɪŋ/; UK: /ˈsoʊldərɪŋ/) is a process of joining two metal surfaces together using a filler metal called solder. The soldering process...

work, solder wire is available in a range of thicknesses for hand-soldering (manual soldering is performed using a soldering iron or soldering gun), and...

heating of the joint by the soldering tool. In high-temperature metal joining processes (welding, brazing and soldering), fluxes are nearly inert at...

A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces. A soldering...

by soldering individual joints with a hot air pencil. Reflow soldering with long industrial convection ovens is the preferred method of soldering surface...

Wave soldering is a bulk soldering process used in printed circuit board manufacturing. The circuit board is passed over a pan of molten solder in which...

The solderability of a substrate is a measure of the ease with which a soldered joint can be made to that material. Good solderability requires wetting...

Ultrasonic soldering (U/S soldering) is a flux-less soldering process that uses ultrasonic energy, without the need for chemicals to solder materials,...

hand (tool) Solder Soldering Wave soldering Reflow soldering Restriction of Hazardous Substances Directive (RoHS) Non-Newtonian fluid "Solder-Paste Printer"...

the wrong direction. For soldering n-type semiconductors, solder may be doped with antimony; indium may be added for soldering p-type semiconductors. Pure...

convection soldering will be used in production. Following reflow soldering, certain irregular or heat-sensitive components may be installed and soldered by hand...

gold (ENIG) Hot air solder leveling (HASL) Immersion silver plating (IAg) Immersion tin plating (ISn) Reflow soldering Wave soldering Tong, K. H., M. T...

A soldering gun is an approximately pistol-shaped, electrically powered tool for soldering metals using tin-based solder to achieve a strong mechanical...

on Technical Aspects of Critical and Strategic Materials. (1970), Trends in the use of tin, National Academies, p. 28. [1] Body Soldering Tools v t e...

boards that are soldered automatically using reflow or wave soldering techniques. Once applied, openings must be made in the solder mask wherever components...

temperatures required for reflow soldering, because the plastic has a lower melting point since they were designed for wave soldering methods. Some JST surface-mount...

Contact soldering stations A soldering station is a multipurpose power soldering device designed for electronic components soldering. This type of equipment...

Selective soldering is the process of selectively soldering components to printed circuit boards and molded modules that could be damaged by the heat...

"Soldering" is a song recorded by Desmond Dekker and the Four Aces in 1965. the title being a euphemism for sexual intercourse, the lyrics are about a...

temperature conditions similar to soldering itself. Though MSL standards are explicitly not meant to be applied during manual soldering and rework, manual rework...

Dip soldering is a small-scale soldering process by which electronic components are soldered to a printed circuit board (PCB) to form an electronic assembly...

in use today. Soldering could be done automatically by passing the board over a ripple, or wave, of molten solder in a wave-soldering machine. However...

Solder reflow Adhesive underfill Final result Head-in-pillow defect, a solder ball failure Definition of: solder ball, PC Magazine glossary Soldering...

difficulties for the soldering process. As package pins got closer together, the danger of accidentally bridging adjacent pins with solder grew. A further...

called the solder form for the soldering. By convention, whenever the choice of soldering is unique or canonically determined, the solder form is called...

soldering, desoldering, hot air); one, or sometimes more, tools may be connected to a station, e.g., a rework station may accommodate a soldering iron...

paste before positioning and soldering the unit. The surface tension of the molten solder, which is on the board's solder pads, tends to pull the device...

allows for placing and replacing the central processing unit (CPU) without soldering. Common sockets have retention clips that apply a constant force, which...

A solder ring fitting, also known by the trademarked name Yorkshire fitting, is a pre-soldered capillary connector for joining copper pipes used in plumbing...

reflow parameters defined by the soldering technologies and component requirements. Manufacturing portal Reflow soldering Thermal profiling Girouard, Roland...