sputtered such that the composition of the sputtered material will ultimately return to AB. The term electronic sputtering can mean either sputtering...

Sputter deposition is a physical vapor deposition (PVD) method of thin film deposition by the phenomenon of sputtering. This involves ejecting material...

An ion pump (also referred to as a sputter ion pump) is a type of vacuum pump which operates by sputtering a metal getter. Under ideal conditions, ion...

High-power impulse magnetron sputtering (HIPIMS or HiPIMS, also known as high-power pulsed magnetron sputtering, HPPMS) is a method for physical vapor...

The Sputter Gun was a prototype test gun using 7 major components from the WW2 era British Sten submachine gun carbine, along with other specially fabricated...

the cathode is made. This process is called sputtering and it gradually ablates the cathode. Sputtering is useful when using spectroscopy to analyze...

technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting...

These limitations make ion beam sputtering less efficient for large-scale applications. Cathodic arc deposition Sputter deposition Ion beam assisted deposition...

substrate. Sputter deposition: a glow plasma discharge (usually localized around the "target" by a magnet) bombards the material sputtering some away as...

can impart sufficient energy to eject atmospheric particles, similar to sputtering from a solid surface. This type of interaction is more pronounced in the...

p. 1442. ISBN 9780831125752. Green, Julissa. "The Forms of Sputtering Deposition". Sputter Targets. Retrieved Sep 15, 2024. "Blackening of steel and cast...

absorber layer from sputtering damage while depositing the ZnO:Al window layer, since the latter is usually deposited by DC sputtering, known as a damaging...

modification (e.g. by sputtering or ion beam etching) and for ion beam analysis. Ion beam application, etching, or sputtering, is a technique conceptually...

dust from its surface due to photon-stimulated desorption, solar wind sputtering, and meteorite impacts. Solar radiation pressure accelerates the sodium...

especially excess current, which increases sputtering of the electrodes. A few extreme examples of sputtering have even resulted in complete disintegration...

synthesized by dissolving nitrogen gas with indium-scandium melts, magnetron sputtering, MBE, HVPE and other deposition methods. Scandium nitride is also an effective...

spraying, laser cladding, electrodeposition, and magnetron sputtering. Magnetron sputtering technique is the most-used method to fabricate the HEAFs. An...

inconclusive fighting, which was joined in 1948 by regular Pakistani army units, sputtered on until the United Nations imposed a ceasefire in January 1949 between...

biochemist. Leaving Buenos Aires, Argentina, in January 1952 on the back of a sputtering single cylinder 1939 Norton 500cc dubbed La Poderosa ("The Mighty One")...

then be accelerated into the cathode, sputtering off atoms from the cathode. Both the buffer gas and the sputtered cathode atoms will in turn be excited...

limited to ~5 nm by sputtering and detector efficiency). At higher primary currents, a great deal of material can be removed by sputtering, allowing precision...

parameters within the sputtering deposition machine. When researchers vary parameters such as concentration of the gases within the sputtering, the pressure within...

gave it 2/5 stars, writing, "No amount of budget could make up for the sputtering mess of a script, or the dead-on-the-inside expressions of the cast –...

like sulphur or oxygen that have a high sputter yield for icy surfaces. E.g. the lifetimes due to sputtering of micron sized dust particles in Saturn's...

structure. It is a superconductor with a critical temperature of 23.2 K. Sputtered films have been reported to have an upper critical field of 37 teslas...

resulting in enhanced sputtering erosion compared to the original crystalline material. The chemical and physical sputtering of SiC is still significant...

Heuer; Stageberg; Chow; Rook; Heuer (1994). "Influence of rf magnetron sputtering conditions on the magnetic, crystalline, and electrical properties of...

technology. On an industrial scale the film deposition is done by magnetron sputter deposition; on a laboratory scale molecular beam epitaxy, pulsed laser...

amorphous hydrogenated silicon, with special emphasis on preparation by sputtering". Solar Energy Materials. 5 (3): 229–316. doi:10.1016/0165-1633(81)90001-0...

while more recently the metal layer is deposited using techniques such as sputtering. Advances in thin film deposition techniques during the 20th century have...