Reverse-path forwarding (RPF) is a technique used in modern routers for the purposes of ensuring loop-free forwarding of multicast packets in multicast...
8 KB (1,248 words) - 02:30, 23 October 2024
Topology broadcast based on reverse-path forwarding (TBRPF) is a link-state routing protocol for wireless mesh networks. The obvious design for a wireless...
2 KB (265 words) - 12:22, 25 March 2022
its own routing tables. PIM uses the unicast routing table for reverse-path forwarding.: 56–57 There are four variants of PIM: PIM Sparse Mode (PIM-SM)...
12 KB (1,660 words) - 15:30, 9 January 2025
Group Management Protocol (IGMP) and a multicast routing protocol (Reverse-path forwarding, PIM-SM) for registration subscriber grouping and control traffic...
6 KB (586 words) - 14:28, 3 April 2025
Routing table (section Forwarding table)
also a key aspect of certain security operations, such as unicast reverse path forwarding (uRPF). In this technique, which has several variants, the router...
8 KB (1,118 words) - 18:14, 20 May 2024
programming language C++11 Port forwarding, the act of forwarding a network port from one network node to another Reverse-path forwarding, a technique used in routers...
2 KB (284 words) - 04:36, 25 January 2024
Product Format, a GIS file format Reverse-path forwarding, a technique in multicast routing in networking Reverse power feeding, in broadband networking...
1 KB (191 words) - 02:11, 23 April 2025
"Troubleshooting Connection Issues". Riot Games Support. Riot Games. Port forwarding. Archived from the original on 2017-08-10. Retrieved 2017-08-10. ... Now...
320 KB (13,125 words) - 07:36, 12 July 2025
However, bogon filters still need to check for Martian packets. Reverse-path forwarding IP hijacking IP address spoofing Ingress filtering Internet background...
6 KB (663 words) - 12:52, 15 July 2025
some router vendors have implemented a mechanism that employs reverse-path forwarding lookups in the router's tables to perform this check. This is often...
9 KB (1,287 words) - 19:41, 3 April 2025
label-switched path (LSP). The reverse is not true, however: an LSP may be (and usually is) used for multiple FECs. MPLS FAQ For Beginners: What is a Forwarding Equivalence...
1 KB (129 words) - 17:41, 11 June 2023
models Free and open-source software portal Internet protocol suite Reverse-path forwarding de Raadt, Theo (2001-05-30). "CVS: cvs.openbsd.org: src; Remove...
6 KB (645 words) - 05:38, 28 June 2025
Equal-cost multi-path routing (ECMP) is a routing strategy where packet forwarding to a single destination can occur over multiple best paths with equal routing...
3 KB (265 words) - 21:55, 29 August 2024
filtering Ingress filtering MAC spoofing Network address translation Reverse-path forwarding Router (computing) Spoofed URL Tanase, Matthew (March 10, 2003)...
9 KB (1,163 words) - 05:55, 21 June 2025
Rally for the People of Burundi Reverse path broadcast, a routing method similar to reverse path forwarding Reverse penhold backhand, a grip in table...
351 bytes (74 words) - 22:12, 12 October 2023
Bounce address (redirect from Reverse path)
variants of the name, none of them used universally, including return path, reverse path, envelope from, envelope sender, MAIL FROM, 5321-FROM, return address...
6 KB (903 words) - 15:13, 10 June 2025
Multiprotocol Label Switching (redirect from Label switched path)
DSL. In an MPLS network, labels are assigned to data packets. Packet-forwarding decisions are made solely on the contents of this label, without the need...
33 KB (4,709 words) - 14:34, 21 May 2025
PMID 12016051. Dalal, Yogen K.; Metcalfe, Robert M. (1 December 1978). "Reverse path forwarding of broadcast packets". Communications of the ACM. 21 (12): 1040–1048...
44 KB (5,460 words) - 15:05, 21 June 2025
sends the packet out through the appropriate interfaces. The term reverse-path forwarding is used to describe this concept of routing packets away from the...
33 KB (4,099 words) - 07:31, 25 June 2025
when forwarding unicast frames across a shared-media link, which avoids spawning additional copies of frames during a temporary loop. A reverse-path forwarding...
19 KB (2,035 words) - 22:47, 3 September 2024
when forwarding unicast frames across a shared-media link, which avoids spawning additional copies of frames during a temporary loop. A Reverse Path Forwarding...
2 KB (369 words) - 22:45, 3 September 2024
return path (VERP) inasmuch as it encodes the original envelope sender in the local part of the rewritten address. Consider example.com forwarding a message...
13 KB (1,730 words) - 18:26, 19 December 2024
Sender Policy Framework (section FAIL and forwarding)
results. See below for a list of alternatives to plain message forwarding. For an empty Return-Path as used in error messages and other auto-replies, an SPF...
27 KB (3,134 words) - 22:42, 24 June 2025
reliable, SNCF (Sequence Number Controlled Flooding) and RPF (reverse-path forwarding). In SNCF, the node attaches its own address and sequence number...
6 KB (676 words) - 22:56, 28 September 2023
Proxy server (section Reverse proxies)
load-balancing, authentication, decryption, and caching. An open proxy is a forwarding proxy server that is accessible by any Internet user. In 2008, network...
47 KB (5,554 words) - 00:50, 15 July 2025
Split horizon route advertisement (redirect from Poison reverse)
advertised with a distance of infinity. The basic idea of poison reverse is to make sure that a path does not turn back into the same node if a cost has changed...
9 KB (1,325 words) - 13:37, 4 July 2025
of implementing this policy; one common mechanism is to enable reverse-path forwarding on links to customers, which will indirectly apply this policy...
7 KB (862 words) - 14:09, 14 June 2025
IEEE 802.1aq (redirect from Shortest path bridging)
: Section 13 SPB allows for shortest-path forwarding in a mesh-connected Ethernet network utilizing multiple equal-cost paths. This permits SPB to support large...
91 KB (11,316 words) - 23:07, 22 June 2025
computer network using the Internet protocol suite that serves as the forwarding host (router) to other networks when no other route specification matches...
9 KB (1,231 words) - 02:00, 15 July 2025
Diode (redirect from Reverse recovery time)
withstand in the clamped reverse-voltage region. Also, following the end of forwarding conduction in any diode, there is reverse current for a short time...
64 KB (7,373 words) - 20:54, 27 June 2025