likelihood of cosmetic defects like sink. Draft angle design is an important factor when designing plastic parts. Because of shrinkage of plastic material...

injection mould, upper side Lego injection mould, detail of upper side Craft Design of plastic components Direct injection expanded foam molding Extrusion moulding...

Simple Plastic Airplane Design (SPAD) is a type of radio controlled model airplane. The R.C. aircraft is usually, though not always, built with the body...

plastic parts such as plastic bumper covers and other plastic components. In the case of webs and films a filler rod may not be used. Two sheets of plastic...

surface is shaped or combined using substances and components, to form a three-dimensional object. The size of a sculptured work can be built very big and could...

reminiscent of rubber because of the physical-chemical properties of its polymer, plasticizer, and resin components, which contribute to its elastic-plastic, sticky...

metric tons of plastic were produced worldwide. If global trends in plastic demand continue, it is projected that annual global plastic production will...

modular construction parts, usually made of plastic, which can be assembled in a form-fit manner. The basic components are usually cuboid-shaped, cylindrically...

a polymer or plastic sample deforms under a specified load. The HDT of a given plastic material is applied in many aspects to the design, engineering...

Fibre-reinforced plastic (FRP; also called fibre-reinforced polymer, or in American English fiber) is a composite material made of a polymer matrix reinforced...

assembly of heated components used in plastic injection molds that inject molten plastic into the cavities of the mold. (The cavities are the part of the mold...

breaks polymer chains and causes the plastic to yellow and become brittle. Most ABS is opaque because its components have different refractive indices....

to produce plastic parts using a core and a cavity. Molds are designed as two-plate or three-plate molds, depending on the type of component to be manufactured...

Indian multinational manufacturer of automotive components, based in Noida. It makes wiring harnesses, plastic components and rearview mirrors for passenger...

surfaces and some plastic dishes. Diallyl-phthalate (DAP) used in high temperature and mil-spec electrical connectors and other components. Usually glass...

usually metal, of varying design, that serves to retain a component in place Lug: a metal connector used to align frame components where they join each...

125 °C, various quad flat package (QFP) components can last over 10,000 thermal cycles whereas QFN components tend to fail at around 1,000-3,000 cycles...

flexible parts, usually plastic, to form the final product by pushing the parts' interlocking components together. There are a number of variations in snap-fits...

Plastics extrusion is a high-volume manufacturing process in which raw plastic is melted and formed into a continuous profile. Extrusion produces items...

returnable plastic bins Automotive original equipment manufacturers (OEMs) use and encourage the use of returnable packaging to move components from their...

The Plastic automotive engine has its origins in the late 1970s with research and work done by Matthew (Matti) Holtzberg of Polimotor Research and his...

Plastic surgery is a surgical specialty involving restoration, reconstruction, or alteration of the human body. It can be divided into two main categories:...

index components were replaced by other components. Companies portal Lists portal Dow Jones Industrial Average#Components Nasdaq-100#Components List of S&P...

Intel iMac, placed all the components immediately behind the display in a plastic casing, creating a slim unified design that tilts only up and down...

developed to produce structural aircraft components in 7475 alloys. Bubble forming The metal in its plastic state is first expanded into a bubble with...

Plastic pipe is a tubular section, or hollow cylinder, made of plastic. It is usually, but not necessarily, of circular cross-section, used mainly to convey...

components) with a hard translucent epoxy material from which the leads emerge. Others, such as DIP switches, are composed of two (or more) plastic housing...

Acrylonitrile Acrylonitrile is an organic compound and one of the components of ABS plastic. Acrylonitrile bottles were introduced in 1974 by Coca-Cola...

microbeads, plastic glitter and plastic pellets (also known as nurdles). Secondary microplastics arise from the degradation (breakdown) of larger plastic products...

variety of the plastic explosive family known as Composition C, which uses RDX as its explosive agent. C-4 is composed of explosives, plastic binder,...