Canadarm or Canadarm1 (officially Shuttle Remote Manipulator System or SRMS, also SSRMS) is a series of robotic arms that were used on the Space Shuttle...

arm is a larger, more advanced version of the Space Shuttle's original Canadarm. Canadarm2 is 17.6 m (58 ft) when fully extended and has seven motorized...

rocket boosters for Endeavour. After its decommissioning, Endeavour's Canadarm (formally the 'Shuttle Remote Manipulator System') was removed in order...

manipulator arms, one large and one small, broadly similar to the Space Shuttle Canadarm and International Space Station Canadarm2, and associated dextrous manipulator...

other experiments including the Shuttle robotic arm, commonly known as Canadarm. Other experiments or tests included Shuttle Multispectral Infrared Radiometer...

human hand, i.e. with independent fingers and thumbs. .. In space, the Canadarm and its successor Canadarm2 are examples of multi degree of freedom robotic...

decommissioned, with the intention that this would act as a successor to the ISS. Canadarm 2 will also help to berth the Axiom Space Station modules to the ISS and...

free-flying stainless steel disk. The WSF was deployed using the Space Shuttle's Canadarm. The WSF then used nitrogen gas thrusters to position itself about 55 km...

Station (ISS), and is a pioneer in space robotics, having constructed the Canadarm, Canadarm2, Canadarm3 and Dextre robotic manipulators for the ISS and NASA's...

Canadian technological contributions to space exploration include the Canadarm on the Space Shuttle and Canadarm2 on the International Space Station....

operate in the payload bay or be deployed by the Remote Manipulator System (Canadarm) as a free-flying satellite. It carried 10 experiments to study formation...

bought the space robotics division of Spar Aerospace—manufacturer of the Canadarm—in March 1999, renaming it MD Robotics. The company completed the Mobile...

Spacesystems". December 5, 2007. Retrieved May 14, 2013. "MDA Selling Canadarm Business to U.S. Firm". CBC News. January 8, 2008. Retrieved February 21...

Weasel all-terrain vehicle, the STEM antenna for the space program, and the Canadarm. Klein worked for forty years as a mechanical engineer at the National...

The "Canada" wordmark on the Canadarm...

Columbia Challenger Discovery Atlantis Endeavour Add-ons Spacelab (ESA) Canadarm (CSA) Extended Duration Orbiter Remote Controlled Orbiter Spacehab Multi-Purpose...

Astronaut Office representative for the development and testing of the Canadarm remote manipulator system and the testing of payload bay door contingency...

used in cooperation with NASA's Space Shuttle program, most notably the Canadarm, a remote manipulator system. The company went through a series of changes...

defines Canada, followed by ice hockey, the national flag, the beaver, the Canadarm, Canada Day, and Canadian Forces peacekeeping. Canada's most well known...

develop the Shuttle Remote Manipulator System (RMS), also known as the "Canadarm" or robot arm. She was the first woman to serve as a CapCom. By early 1982...

the last person to be hands on with the Hubble Space Telescope via the Canadarm. McArthur has served in a number of positions including working in the...

mechanism Gemini IDSS IBDM NDS Soyuz Kontakt SSVP USIS Navigation systems Canadarm Canadarm2 Igla Kurs Lyappa TORU Category:Spacecraft docking systems...

Artemis to provide nanosatellite solutions and exploration support for crewed Artemis missions. MDA  Canada Brampton, Ontario Lunar Gateway Canadarm 3...

"work station" foot restraint at the end of the Remote Manipulator System (Canadarm). On the seventh day of the mission, both astronauts performed another...

Endeavour.: III-366–368  The Remote Manipulator System (RMS), also known as Canadarm, was a mechanical arm attached to the cargo bay. It could be used to grasp...

of the flight were to continue testing the Remote Manipulator System (Canadarm), and to carry out extensive thermal testing of Columbia by exposing its...

program developed the Shuttle Remote Manipulator System (SRMS), or Canadarm 2. The Canadarm 1 was developed by a team led by Spar Aerospace Special Products...

inspection of the Shuttle's impacted starboard side using the Shuttle's Canadarm robot arm, but the limited resolution and range of the cameras made it...

Davis moved the wrist joint on the Remote Manipulator System (RMS) arm (Canadarm) to try to point WSF's Horizon Sensor into the Sun in an attempt to warm...

Musgrave, anchored on the end of the Canadarm, prepares to be elevated to the top of the Hubble Space Telescope to install protective covers on the magnetometers...