A motorcycle fork connects a motorcycle's front wheel and axle to its frame, typically via a yoke, also known as a triple clamp, or triple tree, which...

tube. The development of forks with curves is attributed to George Singer. In motorcycles with telescopic fork tubes, fork offset can be implemented...

isolated from road noise, bumps and vibrations. The typical motorcycle has a pair of fork tubes for the front suspension, and a swingarm with one or two...

telescopic fork is a form of motorcycle front suspension whose use is so common that it is virtually universal. The telescopic fork uses fork tubes and...

vary in height, creating a short or tall Z bar. Bicycle handlebar Motorcycle fork "handlebar". Oxford English Dictionary (2nd ed.). Oxford University...

pole weapon used between the 15th and 19th centuries Motorcycle fork, the portion of a motorcycle that holds the front wheel Pitchfork, a tined farming...

tube diameter. Bicycle forks usually have an offset, or rake (which is different from rake of motorcycle forks), that places the fork ends forward of the...

telescopic fork to its R12 and R17 motorcycles. BMW still uses telescopic forks today on its F-series, G-series, HP, and S1000RR motorcycles. The R-series...

similarly to a conventional motorcycle fork. Its retail price was 90,000 GBP. Dan Sutherland (18 April 2024), "Arc Motorcycles back in liquidation | British...

more conventional motorcycle fork are that hub-center steering separates the steering, braking, and suspension functions. With a fork the braking forces...

pivoting front fork that had been used earlier on single-cylinder motorcycles but had mostly been replaced on other Indian motorcycles by a leaf-sprung...

components of modern motorcycles are presented below. The chassis of a motorcycle includes the frame and suspension, along with the front forks, of the vehicle...

custom motorcycle which emerged in the US state of California in the late 1950s. A chopper employs modified steering angles and lengthened forks for a...

Bicycle and motorcycle geometry Bicycle fork Bicycle performance Bicycle tire Lowsider Motorcycle fork Parallel parking problem Outline of motorcycles and motorcycling...

fork is a suspension component for either: Bicycle fork Motorcycle fork This disambiguation page lists articles associated with the title Front fork....

motor vehicle suspension motorcycle suspension, two-wheeled motor vehicle suspension Motorcycle fork, a component of motorcycle suspension system bicycle...

early motorcycles. Cannondale Head Shok suspension fork Trailing link suspension fork on a Bridgestone Lauf pivotless, trailing link suspension fork Leading...

Down, Houdini's term for the Chinese Water Torture Cell Upside-down motorcycle fork This disambiguation page lists articles associated with the title USD...

Basement from their 2011 album I Wish I Could Stay Here Yoke, part of a motorcycle fork A nickname given by hobbyist for Yokomo A connector used in a stage...

was the motorcycle fork, patented by Joe Merkel as a "truss fork", which could be seen[citation needed] as a predecessor of the telescopic fork. The Flying...

The Indian Chief is a motorcycle that was built by the Hendee Manufacturing Company and the subsequent Indian Motocycle Company from 1922 to the end of...

Wehrmacht in WW2 The British Army's name for the Tomcar Springer fork, a type of motorcycle fork Springer (architecture), the first voussoir of an arch Springer...

of motorcycles and motorcycling: Motorcycle — two-wheeled, single-track motor vehicle. Other names include: motorbike, bike, and cycle. Motorcycling —...

holds the pivoting front fork, while at the rear there is a pivot point for the swingarm suspension motion. Some motorcycles include the engine as a load-bearing...

seat height and increased fork rake, and in 1941 Indian added plunger-style rear suspension. The most common Indian motorcycle made for military use in...

solely on the development and manufacture of motorcycle suspension systems. Shock absorber Motorcycle fork Catterson, Brian (2015-04-22). "WP Factory Tour"...

Buell Motorcycles is an American motorcycle manufacturer based in Grand Rapids, Michigan. It was founded in 1983 by ex-Harley-Davidson engineer Erik Buell...

part of a cycle's tubular frame within which the front fork steerer tube is mounted. On a motorcycle, the "head tube" is normally called the steering head...

Vincent Motorcycles was a British manufacturer of motorcycles from 1928 to 1955. The business was established by Philip Vincent who bought an existing...

degrees of steering axis angle and no fork offset, and thus did not use the principles of bicycle and motorcycle dynamics developed nearly 70 years earlier...