A probe tip is an instrument used in scanning probe microscopes (SPMs) to scan the surface of a sample and make nano-scale images of surfaces and structures...

probe body, the wire is connected to a rigid, pointed metal tip that contacts the DUT. Some probes allow an alligator clip to be attached to the tip,...

between the probe card and wafer. Once the probe card and the wafer are loaded, a camera in the prober will optically locate several tips on the probe card and...

graduations in circular scales on the dial which represent the distance of the probe tip from a zero setting. The internal works of a mechanical dial indicator...

microscopy SRPM, scanning resistive probe microscopy To form images, scanning probe microscopes raster scan the tip over the surface. At discrete points...

repair. Also, systems based on arrays of mechanical and thermally ablative probe tips have been demonstrated. The most commonly used form of maskless lithography...

position of the sample with respect to the tip and recording the height of the probe that corresponds to a constant probe-sample interaction . The surface topography...

gate a tip-attached quantum dot. The quality of an SKP measurement is affected by a number of factors. This includes the diameter of the SKP probe, the...

mechanical probes: active and passive. Passive probes usually consist of a thin tungsten needle. Active probes utilize a FET device on the probe tip in order...

addition, the new system employed an anti-reflection coated ball lens in the probe tip, which reduces reflections that otherwise limit the depth range of the...

scanning probe lithography (b-SPL) uses the high electrical fields created at the apex of a probe tip when voltages are applied between tip and sample...

provide a degree of flexibility. Some touch probes are themselves powered rotary devices with the probe tip able to swivel vertically through more than...

the tip but even at 78 Kelvin atomic resolution is achieved. The 10-cm Atom Probe, invented in 1973 by J. A. Panitz was a “new and simple atom probe which...

the tips and larger than the probe radius, and 3.) the probe sheath sizes are much smaller than the probe separation, then the current to any probe can...

different points every repetition, until the probe tip is in contact. Until then, a tiny arc charges the probe tip, and its capacitance holds the voltage (open...

erasing it (see also: thermo-mechanical scanning probe lithography). After writing, the probe tip can be used to read the indentations. If each indentation...

markings written on it. Proper use of the periodontal probe is necessary to maintain accuracy. The tip of the instrument is placed with light pressure of...

tunneling of photons instead of electrons from the sample surface to the probe tip. A beam of light is focused on a prism at an angle greater than the critical...

converted B-29s using the drogue-and-probe in-flight refueling system with the probe located in one of the F-84's wing-tip fuel tanks. The flying boom is a...

probe tip with an oily black deposit, with associated loss of response. An overly rich mixture causes buildup of black powdery deposit on the probe....

frequency response over a wide range is required (such as in an oscilloscope probe), a voltage divider may have capacitive elements added to compensate load...

a coulombmeter consists of a meter used in combination with a metal probe tip to pinpoint locations of excess charge on, for instance a semiconductor...

tungsten carbide probe tips placed about 20 um apart. Each tip is mounted on a kinematic bearing to minimize "scrubbing" (where the probes scratch along...

conductive probe into contact with a ferroelectric surface (or piezoelectric material) and applying an alternating current (AC) bias to the probe tip in order...

A Luggin capillary (also Luggin probe, Luggin tip, or Luggin-Haber capillary) is a small tube that is used in electrochemistry. The capillary defines...

about 0–8 watts at a frequency of 13.56 MHz. RF energy emanates from the probe tip to tissue within about a millimeter. Thermolysis works by heating the...

focused to the tip apex, which is around 5 nm in radius. This hybrid probe can deliver the excitation light through the fiber to realize tip-enhanced Raman...

(atomic force microscope) probes for the modification of surfaces. In 1992, they used microsecond laser pulses to heat AFM tips to write indents as small...

ion-conductance microscopy (SICM) is a scanning probe microscopy technique that uses an electrode as the probe tip. SICM allows for the determination of the...

Scanning ion-conductance microscopy, a scanning probe microscopy technique that uses an electrode as the probe tip Society of Intensive Care Medicine, Singapore-based...