Manifold injection is a mixture formation system for internal combustion engines with external mixture formation. It is commonly used in engines with spark...

A fuel injection system that uses external mixture formation is called a manifold injection system. There exist two types of manifold injection systems:...

chamber. This is distinct from manifold injection systems, which inject fuel into the intake manifold (inlet manifold) where it mixes with the incoming...

Stroke (mm): 85 × 79.2 Compression ratio: 9.4:1 Multi-point intake manifold injection Turbocharger model: TD04 Peak power: 120 kW (161 hp; 163 PS) Peak...

lower pressure manifold injection systems) or high-pressure mechanical pumps mounted on the engine (for high-pressure direct injection systems). Some...

Jetronic is a trade name of a manifold injection technology for automotive petrol engines, developed and marketed by Robert Bosch GmbH from the 1960s onwards...

primary function of the intake manifold is to evenly distribute the combustion mixture (or just air in a direct injection engine) to each intake port in...

in a carburetor, or a fuel injector in a manifold injection system atomizing fuel into the intake manifold or intake runners as in a petrol engine)....

Electrojector is an electronically controlled multi-point manifold injection (EFI) fuel injection system developed and made by Bendix Corporation. In 1957...

engine includes fully sequential electronic multi-point fuel injection with intake manifold-sited fuel injectors, mapped direct ignition system with solid-state...

air is free to fill the intake manifold, increasing the pressure (filling the vacuum). A carburetor or fuel injection system adds fuel to the airflow...

Technology Motronic for manifold injection Bosch Automotive Technology Electronic throttle control (ETC/EGAS) for manifold injection Hutton, Ray (1 September...

overhead camshafts (SOHC) and a Bosch-made intermittent multi point manifold injection, and developed 250 PS (184 kW; 247 hp). The 600 used what Mercedes...

Secondary air injection (commonly known as air injection) is a vehicle emissions control strategy introduced in 1966, wherein fresh air is injected into...

crankshaft and gearbox are combined in one housing - and has intake manifold injection; The alternator is on the right of the crankshaft, the primary drive...

per cylinder, a compression ratio of 9:1 and featured multi-port manifold injection. It made 133ps (98 kw; 131 bhp) and 152 Nm (112.11 lb-ft) of torque...

"Performance characteristics of a Hydrogen Fueled SI Engine using Timed Manifold Injection". International Journal of Hydrogen Energy. 16 (2): 115–127. Bibcode:1991IJHE...

intake manifolds Ignition system: Electronic ignition system with three spark plugs per rotor Fuel system: Nippon Denso electronic manifold injection Lubrication...

gasoline-fueled, spark plug ignition engine of any kind produced with manifold injection. It was typically rated at 37 kW (50 hp). First produced in 1906 it...

included advanced features, including then called "direct petrol injection" manifold injection, and evaporative engine cooling. Levavasseur experimented with...

mechanical fuel injection 1980-1983 E12 518— South Africa only, 77 kW (105 PS), 10.0:1 compression, Bosch K-Jetronic mechanical fuel injection 1982-1987 E30...

stroke along with different pistons, a different air intake manifold and exhaust manifolds as well as custom engine programming. It has a bore of 93 mm...

plastic intake manifold fuel system, ignition system & management common-rail multi-point electronic sequential indirect fuel injection (MPI) with three...

In internal combustion engines, water injection, also known as anti-detonant injection (ADI), can spray water into the incoming air or fuel-air mixture...

8–2.0 L Manifold injection N43 Inline-four N.A. 2007–2011 1.6–2.0 L Direct injection N13 Inline-four turbo 2011–2015 1.6 L Direct injection N20 Inline-four...

engine is Volkswagen Group's 1.9-litre Pumpe-Düse Turbocharged Direct Injection diesel engine, producing 96 kW (130 PS) and 310 N⋅m (229 lb⋅ft) at 1900...

The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in an internal combustion engine's electronic control system. Engines that...

intake manifold. Some variants use multi-port fuel injection, some have D4 direct injection, and others have a combination of direct injection and multi-port...

09 MPa). Daimler-Benz achieved this BMEP by using, in addition to the manifold injection, resonance effect induction, giving the engine a volumetric efficiency...

motorcycle with multi-point injection; the VFR800FI. The PGM-FI system relies on a piezoelectric sensor to measure intake manifold air pressure, then combines...