Manifold injection is a mixture formation system for internal combustion engines with external mixture formation. It is commonly used in engines with spark...

A fuel injection system that uses external mixture formation is called a manifold injection system. There exist two types of manifold injection systems:...

chamber. This is distinct from manifold injection systems, which inject fuel into the intake manifold (inlet manifold). The use of GDI can help increase...

Stroke (mm): 85 × 79.2 Compression ratio: 9.4:1 Multi-point intake manifold injection Turbocharger model: TD04 Peak power: 120 kW (161 hp; 163 PS) Peak...

Jetronic is a trade name of a manifold injection technology for automotive petrol engines, developed and marketed by Robert Bosch GmbH from the 1960s onwards...

lower pressure manifold injection systems) or high-pressure mechanical pumps mounted on the engine (for high-pressure direct injection systems). Some...

in a carburetor, or a fuel injector in a manifold injection system atomizing fuel into the intake manifold or intake runners as in a petrol engine)....

air is free to fill the intake manifold, increasing the pressure (filling the vacuum). A carburetor or fuel injection system adds fuel to the airflow...

primary function of the intake manifold is to evenly distribute the combustion mixture (or just air in a direct injection engine) to each intake port in...

engine includes fully sequential electronic multi-point fuel injection with intake manifold-sited fuel injectors, mapped direct ignition system with solid-state...

The Bendix Electrojector is an electronically controlled manifold injection (EFI) system developed and made by Bendix Corporation. In 1957, American Motors...

Technology Motronic for manifold injection Bosch Automotive Technology Electronic throttle control (ETC/EGAS) for manifold injection Hutton, Ray (1 September...

gasoline-fueled, spark plug ignition engine of any kind produced with manifold injection. It was typically rated at 37 kW (50 hp). First produced in 1906 it...

overhead camshafts (SOHC) and a Bosch-made intermittent multi point manifold injection, and developed 250 PS (184 kW; 247 hp). The 600 used what Mercedes...

crankshaft and gearbox are combined in one housing - and has intake manifold injection; The alternator is on the right of the crankshaft, the primary drive...

Secondary air injection (commonly known as air injection) is a vehicle emissions control strategy introduced in 1966, wherein fresh air is injected into...

per cylinder, a compression ratio of 9:1 and featured multi-port manifold injection. It made 133ps (98 kw; 131 bhp) and 152 Nm (112.11 lb-ft) of torque...

intake manifolds Ignition system: Electronic ignition system with three spark plugs per rotor Fuel system: Nippon Denso electronic manifold injection Lubrication...

"Performance characteristics of a Hydrogen Fueled SI Engine using Timed Manifold Injection". International Journal of Hydrogen Energy. 16 (2): 115–127. Bibcode:1991IJHE...

included advanced features, including then called "direct petrol injection" manifold injection, and evaporative engine cooling. Levavasseur experimented with...

8–2.0 L Manifold injection N43 Inline-four N.A. 2007–2011 1.6–2.0 L Direct injection N13 Inline-four turbo 2011–2015 1.6 L Direct injection N20 Inline-four...

intake manifold. Some variants use multi-port fuel injection, some have D4 direct injection, and others have a combination of direct injection and multi-port...

stroke along with different pistons, a different air intake manifold and exhaust manifolds as well as custom engine programming. It has a bore of 93 mm...

discharge of the water injection pumps and discharged to the 5,000 psi (345 bar) manifold and wellheads. There were eight water injection wells, each well had...

process is known as soluble core injection molding. This process is often used for automotive parts, such as intake manifolds and brake housings, however it...

started in 1991 in Kopřivnice. It has a Tatra 623 V8 engine with inlet manifold injection producing 225 kW at 6500 rpm. It accelerates from 0–100 km/h (62 mph)...

The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in an internal combustion engine's electronic control system. Engines that...

plastic intake manifold fuel system, ignition system & management common-rail multi-point electronic sequential indirect fuel injection (MPI) with three...

motorcycle with multi-point injection; the VFR800FI. The PGM-FI system relies on a piezoelectric sensor to measure intake manifold air pressure, then combines...

engine is Volkswagen Group's 1.9-litre Pumpe-Düse Turbocharged Direct Injection diesel engine, producing 96 kW (130 PS) and 310 N⋅m (229 lb⋅ft) at 1900...