records. Disc cutting lathes were also used to produce broadcast transcription discs and for direct-to-disc recording. Disc cutting lathes utilize an...

A lathe (/leɪð/) is a machine tool that rotates a workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling...

67. U 87 microphone U 87 microphone Neumann VMS70 disc cutting lathe Neumann VMS70 disc cutting lathe with SX74 cutter head Laura Bush with Jay Leno and...

Instruments in Bridgeport, Connecticut as a manufacturer of disc cutting lathes. The original Scully lathe was a mechanical, weight-driven device that utilized...

specialized kind of ornamental lathe Disc cutting lathe, the groove cutting machine used in the production of vinyl records Lathe (county subdivision), formerly...

electro-mechanical, and electrically driven mastering lathes came into use for cutting master discs (the cylinder format by then having been superseded)...

groove area of the disc. Neumann was responsible for manufacturing the actual DMM cutting equipment as part of its VMS80 series lathes. The advantages of...

various cutting tools, such as tool bits and drill bits. Metal lathes can vary greatly, but the most common design is known as the universal lathe or parallel...

by a special pin that prevents the disc from slipping on the turntable during the recording process if the lathe does not have a vacuum turntable. Drive...

crosstalk at higher frequencies. High-quality disc cutting equipment was capable of making a master disc with 30–40 dB of stereo separation at 1,000 Hz...

fed back to RCA's disc cutting lathe from there. It was Australia's first direct-to-disc recording of the era. The direct-to-disc method had developed...

attached to the first electrical recording system and a pulley-driven disc cutting lathe. Their performances are filmed in single takes. Some of the performers...

Olympia. Inspired by New Zealand's lathe pioneer Peter King, Dixon acquired a disc cutting lathe and began cutting and releasing hand-made DIY records...

arms at them, hurrying them to a finish, because he could see the disc-cutting lathe reaching its ultimate point, almost at the center label." The recording...

the cutting area to prevent the fluid being blown away from the piece due to rapid rotation of the wheel. The workpiece is manually clamped to a lathe dog...

realizations and musique concrète (or acousmatic art). Schaeffer employed a disc cutting lathe, four turntables, a four-channel mixer, filters, an echo chamber,...

digital hardware and plug-ins. Some may contain tape machines and disc cutting lathes. They may also contain full-range monitoring systems and be acoustically...

Cutting fluid is a type of coolant and lubricant designed specifically for metalworking processes, such as machining and stamping. There are various kinds...

some portions of the work are missing due to recording with only one disc cutting lathe. Sergei Rachmaninoff, pianist, with the Philadelphia Orchestra conducted...

to theaters still equipped with disc-only sound projectors. Unless the quantity required was very small, pressed discs were a more economical medium for...

sound in mind, while the others are set up for cutting vinyl with a Neumann VMS-80 Disc cutting lathe. In more recent years, Metropolis Mastering began...

the workpiece to cut an axisymmetric shape. A rotary broach is used in a lathe or screw machine. In both processes the cut is performed in one pass of...

feeds is called profiling. A lathe is a machine tool which spins a block or cylinder of material so that when abrasive, cutting, or deformation tools are...

plate reverb unit was inserted between the tape machine and the LP disc cutting lathe. This is why some later LP and CD reissues of Contemporary albums...

a sequencer fed with wide paper tape, with output recorded by a disc cutting lathe. Siemens Synthesizer (1959) at Siemens-Studio für elektronische Musik...

Fulginiti with a disc cutting lathe...

In addition to lathes, mandrels, more usually referred to as “arbours” are used to hold buffing wheels, circular saws, and sanding discs. Typically, such...

1721. In 1718 Nartov invented what might have been the first lathe with a mechanical cutting tool-supporting carriage and a set of gears. Using the inventions...

engineering Mechanics Mechanism (engineering) Antikythera mechanism Automatic lathe Enigma machine Early flying machines History of the bicycle History of computing...

one roof: three recording and mixing rooms, a mastering room with a disc cutting lathe, a high-speed tape duplication room, and office space for label and...