Front-engine design is an automotive design where the engine is in the front side of the car, connected to the wheels via a drive shaft. The main types...

a mid-engine layout describes the placement of an automobile engine in front of the rear-wheel axles, but behind the front axle. The mid-engine, rear-wheel-drive...

In automobile design, a rear-engine design layout places the engine at the rear of the vehicle. The center of gravity of the engine itself is behind the...

design, a front-engine, front-wheel-drive (FWD) layout, or FF layout, places both the internal combustion engine and driven roadwheels at the front of...

In automotive design, an F4, or front-engine, four-wheel drive (4WD) layout places the internal combustion engine at the front of the vehicle and drives...

thereof.[citation needed] The Volkswagen VR6 engine was designed for transverse engine installations in front-wheel drive vehicles. The narrow angle of 15°...

In automotive design, a front-mid-engine, front-wheel-drive layout (also called more simply "mid-engine, front-wheel-drive layout", and abbreviated MF...

The front-engine dragster is a type of racing car purposely built for drag racing. Commonly known as a "rail", "digger", or "slingshot", it is now considered...

A front-engine, rear-wheel-drive layout (FR), also called Système Panhard is a powertrain layout with an engine in front and rear-wheel-drive, connected...

Citroën, Dodge, Eagle, Fiat, Lancia, Porsche and Saab. Front-engine design · Transverse engine · Front-wheel drive configuration 1996–2004 Peugeot 406 V6...

Front-wheel drive (FWD) is a form of engine and transmission layout used in motor vehicles, in which the engine drives the front wheels only. Most modern...

layout consists of a front-engine design, with transaxle-type transmissions mounted at the rear of the engine. The cars are front-wheel drive, or on some...

transverse engine is an engine mounted in a vehicle so that the engine's crankshaft axis is perpendicular to the direction of travel. Many modern front-wheel...

Hemi V6 displacing 235 cubic inches (3.9 L) designed by Chrysler's Powerplant Research and Engine Design division. Known internally as A173, it was meant...

V8 engine designed autonomously by Mercedes-Benz subsidiary Mercedes-AMG, as previous AMG engines have always been based on original Mercedes engines. The...

In automotive design, an RMR, or rear mid-engine, rear-wheel-drive layout is one in which the rear wheels are driven by an engine placed with its center...

(UX design); and search engine optimization. Often many individuals will work in teams covering different aspects of the design process, although some...

recirculation, appropriate calibration of the engine's ignition timing schedule, and careful design of the engine's combustion chambers and cooling system as...

The Wankel engine (/ˈvʌŋkəl/, VAHN-kəl) is a type of internal combustion engine using an eccentric rotary design to convert pressure into rotating motion...

the cab-over design allows the vehicle's wheelbase to be shorter than in the conventional arrangement, wherein the engine is placed in front of the cab...

of a conventional front-engine, rear-wheel-drive vehicle layout. The earliest example of the form appeared in 1932, with the design and construction of...

commonplace front-engine design (as either an FF layout, FR layout or F4 layout), however the majority of cars with a mid-engine design or rear-engine design belong...

The Mazda RX-7 is a front mid engine, rear-wheel-drive, rotary engine-powered sports car, manufactured and marketed by Mazda from 1978 through 2002 across...

In automotive design, an RR, or rear-engine, rear-wheel-drive layout places both the engine and drive wheels at the rear of the vehicle. In contrast to...

323 models were all two-track Tucker Sno-Cats with a conventional front engine design. There are at least two variants of the Tucker Kitten, some have...

engine equipped with the mainframe and variable valve timing mechanism (VVA), the inverted front fork, etc. The exterior parts are specially designed...

Italian pronunciation: [dɔdit͡ʃi t͡ʃiˈlin.dri]; Type F167) is a two-seater front-engine, rear-wheel-drive grand tourer produced by the Italian sports car manufacturer...

progressive-rate coil spring suspension (front and rear), and powered by a petrol BMW B58 or diesel BMW B57 inline six turbocharged engine. Ineos Automotive Ltd was...

Although designed separately from the Taunus engine, the Essex also was a 60-degree V4 with water cooling, overhead valves, and designed for use in front-engined...

largely on its predecessor, the front-engined 275 GTB, and was the final flagship Ferrari to feature a front-engine design. Ferrari's engineers gave the...