Mean time between failures (MTBF) is the predicted elapsed time between inherent failures of a mechanical or electronic system during normal system operation...

"useful life period". The mean time between failures (MTBF, 1 / λ {\displaystyle 1/\lambda } ) is often reported instead of the failure rate, as numbers such...

In a system the mean time between outages (MTBO) is the mean time between equipment failures that result in loss of system continuity or unacceptable degradation...

light bulb the concept of mean time between failures is used to describe the failure rate. MTFF and MTTF (mean time to failure) have identical meanings...

corrective maintenance time for failures divided by the total number of corrective maintenance actions for failures during a given period of time. It generally...

typically have a technical definition of mean time between failures (MTBF), mean time to repair or mean time to recovery (MTTR); identifying which party...

issue. Mean time to repair Mean time between failures Mean down time Service-level agreement "Also refer to "Mean Time To Repair" or "Mean Time To Restore""...

approaches share the goal of finding causal dependencies between a hazard on system level and failures of individual components. Qualitative approaches focus...

alternative metric is mean time between failures (MTBF). Recovery time (or estimated time of repair (ETR), also known as recovery time objective (RTO) is...

225, 246 and 261. The mean time between failures is 59.6. The figure below shows the distribution of the time between failures. The blue tick marks beneath...

availability of the system, in which it operates, equals mean time between failures MTBF/(MTBF+ mean time to repair MTTR). The impact of a one-off/non-repairable...

failure, firmware corruption, media damage, heat, water damage, power issues and mishaps. Drive manufacturers typically specify a mean time between failures...

prediction is generally expressed in FIT (number of failures for 109 hours) or MTBF (Mean Time Between Failures). This guide provides reliability data for RAMS...

210 kg (463 lb) (dry) Designer: Tusaş Engine Industries (TEI) Mean Time Between Failures (MTBF): > 1000 hours Valvetrain: Overhead camshaft, DOHC Supercharger:...

radar system (like most other early generation radars) had a low mean time between failures (MTBF). The radar lacked look-down/shoot-down capabilities (though...

failure rate (AFR) gives the estimated probability that a device or component will fail during a full year of use. It is a relation between the mean time...

converter type tube, it was possible to view infrared light in real time, for the first time. Development continued in the US as well during the 1930s and mid-1930...

relative to the infrastructure used. MTBF (Mean Time Between Failures) is the average time between failures for a server. It is also relative to the infrastructure...

the 1 million hours mean time between failures (MTBF) recommendation for server-grade hard drives. The 500 GB, first-generation Time Capsule shipped with...

Height: 574 mm (23 in) Dry weight: 186 kg (410 lb) Mean time between failures: > 100,000 h Time between overhauls: 1,800 h Fuel type: Kerosene and diesel...

to/used alongside failure metrics. Common measurements include mean time between failures (MTBF), mean time to first failure (MTFF), mean time to repair (MTTR)...

and to avoid part breakage, designs attempt to increase the mean time between failures. Cocking handles must also be easily and comfortably gripped by...

cook-off prevention, link testing, and reinforcement, to raise the mean time between failures to 1-in-1000 rounds fired. Four arms manufacturers, three independent...

is an alternative measure of performance to the mean time between failures (MTBF), defined as the time period during which a device will be able to perform...

factors reduce service life of these parts, reliability, and mean time between failures. The operation of the system is highly dependent on both the length...

commonly used for consumer products, and the terms "mean time to breakdown" and "mean time between failures" are used in engineering. The earliest documented...

time between failures, the reciprocal of the failure rate in the special case when failure rate is constant Mean time between outages, the mean time between...

hour. Numerically, this lambda is also the reciprocal of the mean time between failures. In criminology, lambda denotes an individual's frequency of offences...

structure of the active layer mitigate the resonances and modes. Mean time between failures: The first components it is expected to fail in a TMOS technology...

number of discrete systems in a cluster will be greater than the mean time between failures (MTBF) for any hardware platform[dubious – discuss], no matter...