telecommunication, a measuring receiver or measurement receiver is a calibrated laboratory-grade radio receiver designed to measure the characteristics...

instruments in remote locations. Measuring receiver - a calibrated, laboratory grade radio receiver used to measure the characteristics of radio signals...

A receiver operating characteristic curve, or ROC curve, is a graphical plot that illustrates the performance of a binary classifier model (can be used...

To measure the power of a specific frequency component in the presence of other signals at different frequencies a spectrum analyzer or measuring receiver...

In aviation, distance measuring equipment (DME) is a radio navigation technology that measures the slant range (distance) between an aircraft and a ground...

Tektronix. Burke, Charles (March 1930). "The Standard-Signal Method of Measuring Receiver Characteristics" (PDF). General Radio. Archived (PDF) from the original...

which 1: "(measuring devices) The ratio of the magnitude of its response to the magnitude of the quantity measured.” and 2: "(radio receiver or similar...

a forward pass: only an eligible pass receiver may legally catch a forward pass, and only an eligible receiver may advance beyond the neutral zone if...

modal analysis. Electrical measurements Electromagnetic spectrum Measuring receiver Radio-frequency sweep Spectral leakage Spectral music Radio spectrum...

Parliament,—and ends with the words,—and for allowing further Time to the Receivers of certain Aids, for setting insuper for Monies in Arrear. The whole act...

weighting those of intermediate duration according to audibility. Measuring receiver Peak programme meter Edwin L. Bronaugh (2001). "The Quasi-Peak Detector"...

device can be tested by applying a single frequency to its input and measuring the response at its output. If there is any non-linearity in the device...

CNIR. C/N estimators are needed to optimize the receiver performance. Typically, it is easier to measure the total power than the ratio of signal power...

the receiver within a wide area. Finer accuracy was then provided by measuring the phase difference of the signals, overlaying that second measure on the...

instruments, and industrial applications. Velocity receivers operate on the principle of measuring the relative speed between two components or points...

methods based upon the speed of light. Surveying is one ancient use of measuring long distances. For tiny objects such as crystals and diffraction gratings...

electrical and magnetic readings within narrow bandwidths. Typical measuring receivers used by EMC testing laboratories divide the electromagnetic spectrum...

development of modern measuring instruments. In the past, a common time measuring instrument was the sundial. Today, the usual measuring instruments for time...

the CERN Neutrinos to Gran Sasso beam, for the measurement. Measuring speed meant measuring the distance traveled by the neutrinos from their source to...

Service Rules November 7, 1940 4425 2765 8586 Authorizing the Inspection by Receivers, and Trustees in Bankruptcy, and Their Duly Constituted Attorneys in Fact...

received at the receiver's end and the receiver's sensitivity. The receiver's sensitivity is the minimum received power level at which the receiver can correctly...

RXTEST2 are known as coherent receivers as they share the same reference oscillator, and they are capable of measuring the test signal's amplitude and...

will be compatible with the future use of Directional Infrared Counter Measures (DIRCM). "Archived copy" (PDF). Archived from the original (PDF) on 2012-04-17...

instant when a radio signal emanating from a transmitter reaches a remote receiver. The time span elapsed since the time of transmission (TOT or ToT) is the...

agreed-upon and coordinated frequencies. Measuring receiver Spectrum management Technical surveillance counter-measures Graham A. Jones; Edmund A. Williams;...

s}} is the time in the frame in which the source is at rest. The receiver will measure the received frequency to be Eq. 1:    f r = f r , s γ {\displaystyle...

source and receiver. In most networks, the speed of the acoustic signal is assumed at a specific value. This value is either derived from measuring a signal...

respect to a reflected echo of that pulse. United States airborne ESM receivers are designated in the AN/ALR series. Desirable characteristics for electromagnetic...

attached to dipole and loop antennas to detect them. These precursor radio receivers were primitive devices, more accurately described as radio wave "sensors"...

of the sender and how it encodes information, but also a model of the receiver and how it acts on the information received. The determination of pragmatic...