A multiswitch is a device used with a dual or quattro LNB to distribute satellite TV signals to multiple (usually more than four) receivers from a single...
6 KB (935 words) - 12:21, 25 May 2020
the antenna equipment (either multiple LNBs, a multi-output LNB or a multiswitch distribution system) because of the large bandwidth requirement of the...
12 KB (1,604 words) - 06:33, 16 July 2024
for connection to a multiswitch (the term and the LNBs fell out of use with the introduction of the universal LNB and the multiswitch equivalent, the quattro...
35 KB (4,176 words) - 03:46, 13 March 2025
cables from the LNB to a 'multiswitch' switching matrix, which allows the connection of multiple receivers to the multiswitch in a star topology using...
18 KB (2,232 words) - 09:01, 15 May 2025
2250–3000 MHz, are used. Newer LNBFs in use by DirecTV, called SWM (Single Wire Multiswitch), are used to implement single cable distribution and use a wider frequency...
72 KB (8,045 words) - 03:23, 15 April 2025
used in SP1 switch was similar but even smaller. The ITT Pentaconta Multiswitch of the same era had usually 22 verticals, 26 levels, and six to twelve...
21 KB (2,996 words) - 08:18, 29 April 2025
supplied as required to each of the multiple outlets connected to an IF multiswitch. In an optical fibre system at the LNB the four sub-bands are "stacked"...
10 KB (1,139 words) - 19:02, 4 May 2025
satellites at 28° East will require a separate feed and a DiSEqC or Multiswitch with a Diseqc compatible receiver. 2rn state that a dish of 1 metre (39 in)...
13 KB (1,343 words) - 14:07, 14 May 2025
conventional receiver operation), in a distribution device analogous to an IF multiswitch positioned close to the antenna, or even at the antenna itself in the...
23 KB (2,535 words) - 12:44, 16 March 2025