A segmented spindle, also known by the trademark Kataka, is a specialized mechanical linear actuator conceived by the Danish mechanical engineer Jens...

mechanical actuator. Another family of actuators are based on the segmented spindle. Rotation of the jack handle is converted mechanically into the linear...

Linear actuator – Actuator that creates motion in a straight line Segmented spindle – spindle consisting of discrete elements that can be assembled and disassembled...

vase. With segmented turning, the size and patterns are limited only by imagination, skill and patience. While the vast majority of segmented turnings are...

machine tools, a spindle is a rotating axis of the machine, which often has a shaft at its heart. The shaft itself is called a spindle, but also, in shop-floor...

SpindleHorse, commonly referred to as SpindleHorse Toons, is an American animation production company founded by Vivienne "VivziePop" Medrano in 2018...

(e.g., in turning and boring), the units are almost always distance per spindle revolution (inches per revolution [in/rev or ipr] or millimeters per revolution...

drill is a simple hand-operated type of tool, consisting of a rod (the spindle or drill shaft) that is set in rapid rotary motion by means of a cord wrapped...

A spindle, in furniture, is a cylindrically symmetric shaft, usually made of wood. A spindle is usually made of a single piece of wood and typically has...

frame). The spindle is a very accurately machined screw and the object to be measured is placed between the spindle and the anvil. The spindle is moved by...

represented by the magnetic transitions. A typical HDD design consists of a spindle that holds flat circular disks, called platters, which hold the recorded...

machine taper is a system for securing cutting tools or toolholders in the spindle of a machine tool or power tool. A male member of conical form (that is...

outside diameter. Spindle sabots are the standard type used in modern large caliber armor-piercing ammunition. Three-petal spindle-type sabots are shown...

axis parallel to the bed, called the spindle. Spindles are often hollow and have an interior Morse taper on the spindle nose (i.e., facing to the right /...

Spindle turning, or turning between centers, is a woodturning method referring to a piece of wood on a wood lathe that is being turned on its center axis...

circle. The main types of toruses include ring toruses, horn toruses, and spindle toruses. A ring torus is sometimes colloquially referred to as a donut...

component, as in the tonic stretch reflex. When a muscle lengthens, the muscle spindle is stretched and its nerve activity increases. This increases alpha motor...

milling machine the spindle axis is vertically oriented. Milling cutters are held in the spindle and rotate on its axis. The spindle can generally be lowered...

North America or spindle moulder in the UK and Europe), is a stationary woodworking machine in which a vertically oriented spindle drives one or more...

needles, needle cases, thimbles, pens, chessmen, spinning tops; legs, spindles, and pegs for furniture; balusters and newel posts for architecture; baseball...

fiber. It is the sensory fiber of a stretch receptor called the muscle spindle found in muscles, which constantly monitors the rate at which a muscle...

for the ECU of an engine. The sensor is usually located on the butterfly spindle/shaft, so that it can directly monitor the position of the throttle. More...

measuring 6.3–17.0 μm. The outer tissue of the stipe consists of short-segmented, inflated, threadlike parallel hyphae with thick walls, measuring 9.3–22...

(group II neurons). These two types of sensory neurons compose muscle spindles. There is a similar division of encoding in invertebrates; different subgroups...

tool with a flat base and a rotating blade extending past the base. The spindle may be driven by an electric motor or by a pneumatic motor. It routs (hollows...

would be crowdfunded through Patreon. Medrano founded the animation studio SpindleHorse, under which the pilot for Hazbin Hotel, the pilot and first season...

main spindle is generally hollow to allow long bars to extend through to the work area. This reduces preparation and waste of material. The spindle runs...

known as Braddock Road (except for a small section in Centreville called Spindle Court). SR 620 also has a short concurrency with SR 659 / Union Mill Road...

(i.e., production, workshop, cost). The grinding wheel rotates in the spindle head and is also adjustable for height, by any of the methods described...

carrying genetic information, align in the equator of the cell between the spindle poles at the metaphase plate, before being separated into each of the two...