In economics, an input–output model is a quantitative economic model that represents the interdependencies between different sectors of a national economy...

In virtualization, single root input/output virtualization (SR-IOV) is a specification that allows the isolation of PCI Express resources for manageability...

engineering, a single-input and single-output (SISO) system is a simple single-variable control system with one input and one output. In radio, it is...

Programmed input–output (also programmable input/output, programmed input/output, programmed I/O, PIO) is a method of data transmission, via input/output (I/O)...

Multiple-Input and Multiple-Output (MIMO) (/ˈmaɪmoʊ, ˈmiːmoʊ/) is a wireless technology that multiplies the capacity of a radio link using multiple transmit...

property:: p. 50  Given a system with a time-dependent output function ⁠ y ( t ) {\displaystyle y(t)} ⁠, and a time-dependent input function ⁠ x ( t ) {\displaystyle...

programming language provides many standard library functions for file input and output. These functions make up the bulk of the C standard library header...

linear system is applicable to SISO (single-input single-output) systems. For MIMO (multiple-input multiple-output) systems, input and output signal vectors...

In system analysis, among other fields of study, a linear time-invariant (LTI) system is a system that produces an output signal from any input signal...

read off from the input or output power axis, leading to input (IIP3) or output (OIP3) intercept point respectively. Input and output intercept point differ...

A general-purpose input/output (GPIO) is an uncommitted digital signal pin on an integrated circuit or electronic circuit (e.g. MCUs/MPUs) board that can...

A single-board computer (SBC) is a complete computer built on a single circuit board, with microprocessor(s), memory, input/output (I/O) and other features...

(0)=\mathbf {0} } and a single-input single-output (SISO) system, the transfer function is defined as the ratio of output and input G ( s ) = Y ( s ) / U...

modulation produces an output signal the bandwidth of which is twice the maximum frequency of the original baseband signal. Single-sideband modulation avoids...

presenting a Hi-Z output) when the enable signal B is off or as a regular non-inverting buffer (which duplicates and boosts the input onto the output) when the...

c := first char of input end if output (d, l, c) discard l + 1 chars from front of window s := pop l + 1 chars from front of input append s to back of...

specialized input/output IC, such as an Intel 8255 or Motorola 6821 parallel input/output adapter. Later single-chip microcontrollers have input and output pins...

The input–process–output (IPO) model, or input-process-output pattern, is a widely used approach in systems analysis and software engineering for describing...

computers, such as the ENIAC, and the IBM NORC, provided for punched card input/output. Card readers and punches, either connected to computers or in off-line...

digital input signals and forwards the selected input to a single output line. The selection is directed by a separate set of digital inputs known as...

tens of megawatts. The power conversion systems can be classified according to the type of the input and output power: AC to DC (rectifier) DC to AC (inverter)...

siso in Wiktionary, the free dictionary. SISO may refer to: Single-input single-output system, in control engineering Soft-in soft-out decoder, a type of...

DC-coupled electronic voltage amplifier with a differential input, a (usually) single-ended output, and an extremely high gain. Its name comes from its original...

In computing, an input device is a piece of equipment used to provide data and control signals to an information processing system, such as a computer...

noninverting input of a comparator or differential amplifier. It is an active circuit which converts an analog input signal to a digital output signal. The...

is called a single-input-single-output (SISO) control system; MIMO (i.e., Multi-Input-Multi-Output) systems, with more than one input/output, are common...

computer science, asynchronous I/O (also non-sequential I/O) is a form of input/output processing that permits other processing to continue before the I/O operation...

Input/output automata provide a formal model, applicable in describing most types of an asynchronous concurrent system. On its own, the I/O automaton model...

component that adds complexity and cost to the system; use of center-tapped transformers for input and output is a common technique but adds weight and restricts...

Transfer functions are commonly used in the analysis of systems such as single-input single-output filters in signal processing, communication theory, and...