A splice joint is a method of joining two members end to end in woodworking. The splice joint is used when the material being joined is not available...

Rope splicing in ropework is the forming of a semi-permanent joint between two ropes or two parts of the same rope by partly untwisting and then interweaving...

mitred corner is desired Shiplap Bridle joint Halved joint Scarf joint Splice joint Finger joint Types of Timber Joints Used in Woodworking - Heaps of practical...

joints such as the butt joint and the splice joint and is often favored over these in joinery because it yields a barely visible glue line. The joint...

into the other Eye splice, a method of creating a permanent loop in the end of multi stranded rope by means of rope splicing Splice joint, a method of joining...

substitutes (such as laminate), to produce more complex items. Some woodworking joints employ mechanical fasteners, bindings, or adhesives, while others use only...

splicing is often necessary to join conductors to provide the desired length. It is important that the splice not be the weak link. A splice (joint)...

debris to the side of the tape path, instead of accumulating in the splice joint. A side-effect of cutting the tape at an angle is that on stereo tapes...

A mechanical splice is a junction of two or more optical fibers that are aligned and held in place by a self-contained assembly (usually the size of a...

A fishplate, splice bar or joint bar is a metal or composites connecting plate used to bolt the ends of two rails into a continuous track. The name is...

A dovetail joint or simply dovetail is a joinery technique most commonly used in woodworking joinery (carpentry), including furniture, cabinets, log buildings...

A 'Splice' is an Australian ice cream confectionery consisting of ice cream encased in frozen fruit flavoured ice. A wooden stick is set into the ice cream...

multimode fiber by an imperfect splice or imperfectly mated connectors. Mechanical disturbance of the fiber ahead of the joint will introduce changes in the...

A miter joint (mitre in British English) is a joint made by cutting each of two parts to be joined, across the main surface, usually at a 45° angle, to...

Sliding dovetail, lap dovetail and stepped bevel splice joints of tie beams and cross beams from the Yingzao Fashi, published in 1103 by the Song dynasty...

A butt joint is a wood joint in which the end of a piece of material is simply placed (or “butted”) against another piece. The butt joint is the simplest...

queen posts. The queen post truss extends the span, and combined with spliced joints in the longer members extends the useful span for trusses of these types...

formats such as HLS and DASH. Work on splicing GOP compressed video streams was started by SMPTE ST 312M Television - Splice Points for MPEG-2 Transport Streams...

of pork Water butt, a rainwater tank Archery butt, practice target Butt splice connector, a type of crimp electrical connector "Butt Butt", a song by Monrose...

A butterfly joint, also called a bow tie, dovetail key, Dutchman joint, or Nakashima joint, is a type of joint or inlay used to hold two or more pieces...

transmission of light across the joint. Mechanical splices typically have a higher optical loss and are less robust than fusion splices, especially if the gel is...

attachment.: 56  (e.g. pin headers, screw terminals, board-to-board connectors) Splice or butt connectors (primarily insulation displacement connectors) that permanently...

of windows or voids in the resulting splice. Waterproofing hand taped splicing is very difficult. Pre-molded joints are injection molded bodies created...

A finger joint, also known as a comb joint, is a woodworking joint made by cutting a set of complementary, interlocking profiles in two pieces of wood...

A jointer or in some configurations, a jointer-planer (also known in the UK and Australia as a planer or surface planer, and sometimes also as a buzzer...

pressed together forming a strong weld. Thermite welding is used to repair or splice together existing continuous welded rail segments. This manual process requires...

A box joint is a woodworking joint made by cutting a set of complementary, interlocking profiles in two pieces of wood, which are then joined (usually)...

includes their own track "Meatball", released under the pseudonym "Emmanuel Splice". Svein Berge also contributed as a board member for the celebration of...

A bridle joint is a woodworking joint, similar to a mortise and tenon, in that a tenon is cut on the end of one member and a mortise is cut into the other...

categories based on the type of joint, they are, Butt splicing where adhesives are used and Lap splicing: lap joint by means of applying heat and pressing...