In statics and structural mechanics, a structure is statically indeterminate when the equilibrium equations – force and moment equilibrium conditions –...

forces and reactions. Such a situation is described as statically indeterminate. Statically indeterminate situations can often be solved by using information...

equations. Such beams are called statically indeterminate. The built-in beams shown in the figure below are statically indeterminate. To determine the stresses...

both ends fixed is statically indeterminate to the 3rd degree, and any structural analysis method applicable on statically indeterminate beams can be used...

performance is determined by chance Statically indeterminate, in statics, describing a structure for which the static equilibrium equations are insufficient...

strength of materials. In 1874, Mohr formalised the idea of a statically indeterminate structure. Mohr was an enthusiast for graphical tools and developed...

moment distribution method is a structural analysis method for statically indeterminate beams and frames developed by Hardy Cross. It was published in...

developer of the moment distribution method for structural analysis of statically indeterminate structures. The method was in general use from c. 1935 until c...

(physics) Poisson's ratio Post and lintel Shear strength Statics and Statically indeterminate Stress (mechanics) and Strain (materials science) Thin-shell structure...

computer-automated analysis of complex structures including the statically indeterminate type. It is a matrix method that makes use of the members' stiffness...

also developed by Hardy Cross as a way to determine the forces in statically indeterminate structures. The introduction of the Hardy Cross method for analyzing...

work as a special case 1874: Otto Mohr formalized the idea of a statically indeterminate structure. 1922: Timoshenko corrects the Euler–Bernoulli beam equation...

Trusses that are supported at more than two positions are said to be statically indeterminate, and the application of Newton's Laws alone is not sufficient to...

between adjacent slices constrain each slice and make the problem statically indeterminate when they are included in the computation. For the ordinary method...

stress from thermal expansion and contraction, this kind of arch is statically indeterminate (the internal state is impossible to determine based on the external...

in computation (disambiguation) Indeterminate system Aleatoric music and indeterminacy in music Statically indeterminate Underdetermined system In set theory...

neglecting axial forces, statically determinate real beams have statically determinate conjugate beams; and statically indeterminate real beams have unstable...

intersections. A statically determinate structure can be fully analysed using only consideration of equilibrium, from Newton's laws of motion. A statically indeterminate...

work" as a special case. 1874: Otto Mohr formalized the idea of a statically indeterminate structure. 1922: Timoshenko corrects the Euler–Bernoulli beam equation...

the concrete is complicated.: 153  Furthermore, rigid frames are statically indeterminate and the analysis is more challenging than that of simply supported...

were not very common before the mid-20th century because they are statically indeterminate, which makes them difficult to design without the use of computers...

+Trq 2 =Trq in . This means the maximum torque to either wheel is statically indeterminate but is in the range of ½ Trq in ±( ½ Trq d ). Several types of...

challenges slowed their widespread adoption: Continuous trusses are statically indeterminate, which made it very laborious to calculate the stresses in the...

significantly change the internal load distribution, particularly in statically indeterminate beams. The internal load distribution associated with the deformed...

found immediately from (3) provided that the system is stable. For statically indeterminate systems, M > N, and hence, we can augment (3) with I = M−N equations...

it is statically determinate; a two-hinged bridge is statically indeterminate in one degree of freedom, while a fixed arch bridge is indeterminate in three...

Moment redistribution refers to the behavior of statically indeterminate structures that are not completely elastic, but have some reserve plastic capacity...

developer of the moment distribution method for structural analysis of statically indeterminate structures Howard Wilson Emmons (PhD '38) - mechanical engineer...

bolted to every third tie. The inner truss of a Howe truss is statically indeterminate. There are two paths for stress during loading, a pair of diagonals...

moment distribution method. It enabled designers to calculate statically indeterminate frames of reinforced concrete. Newmark looked up to Cross; in Cross's...