In internal combustion engines, water injection, also known as anti-detonant injection (ADI), can spray water into the incoming air or fuel-air mixture...

Water injection may refer to: Water injection (engine), for increasing efficiency or power of internal combustion engines Water injection (oil production)...

with turbocharger and common rail direct injection. The Mercedes OM602 engine is a 5-cylinder diesel engine of 2.5 or 2.9 L (2,497 or 2,874 cc). The 2...

diesel engine with indirect injection manufactured by Mercedes-Benz between 1993 and 2001. It replaced the single overhead camshaft (SOHC) OM603 engine. It...

multi-port fuel injection, some have D4 direct injection, and others have a combination of direct injection and multi-port fuel injection or D4-S. The GR...

started with the 1UR-FSE engine with D-4S direct injection for the 2007 Lexus LS. The series launched with a die-cast aluminum engine block, aluminum cylinder...

Manifold injection is a mixture formation system for internal combustion engines with external mixture formation. It is commonly used in engines with spark...

belt-driving engine accessories and optimizing the dimensions of the base engine. The injection pattern has been altered to have two pilot injections over a...

metered by multipoint fuel injection or direct injection. Some variants are turbocharged. Since 2013, some of the K engines range have been upgraded with...

non-direct-injection gasoline engines, as unburned fuel is not present during valve overlap, and therefore no fuel goes directly from the intake/injection to...

An injection pump is the device that pumps fuel into the cylinders of a diesel engine. Traditionally, the injection pump was driven indirectly from the...

Work. Leonard Dyer invented a six-stroke, internal combustion, water-injection engine in 1915, very similar to Crower's design (see below). A dozen more...

Unlike earlier diesel engines the B-series Cummins used direct injection and did not need glow plugs for cold starting. The engine was first manufactured...

The magnesium injection cycle (MAGIC) is an engine design under development by Mitsubishi Corporation and the Tokyo Institute of Technology that uses magnesium...

Thrust reversal Turbojet development at the RAE Variable cycle engine Water injection (engine) Note: In Newtonian mechanics kinetic energy is frame dependent...

kilowatts). The engine features common rail Direct injection and a variable nozzle turbocharger. The injection system operates at 1,600 bar (23,000 psi), while...

and a water pump no longer driven by it. The LDE engine meets Euro VI and KULEV emission standards. With the addition of secondary air injection to the...

turbocharged, direct-injection gasoline engines produced by Ford and originally co-developed by FEV Inc. (now FEV North America Inc.). EcoBoost engines are designed...

Indirect injection in an internal combustion engine is fuel injection where fuel is not directly injected into the combustion chamber. Gasoline engines equipped...

prefix: 03P, ID code: CFWA engine configuration & engine displacement inline three-cylinder (R3/I3) Turbocharged Direct Injection (TDI) turbodiesel; 1,199 cc...

multi-point fuel injection (MPFI) system. Changes from the VG engine include switching to a timing chain from a timing belt, and relocating the water pump from...

toothed belt that also controls the diesel injection pump. A second belt rotates the alternator and water pump, while a vacuum pump located at the rear...

mechanical injection pump. GM replaced the DB-2 with the electronic throttle DS-4 in 1994–2000 vehicles. In mid-1996, GM implemented a redesigned engine cooling...

system, it was later upgraded to Electronic Fuel Injection, with the -E suffix added to the engine designation. Toyota specified unleaded fuel with a...

0, and 3.5 L versions were also available with gasoline direct injection. This engine has been the flagship powerplant of the company except when they...

racing. Reliable operation of an engine with nitrous injection requires careful attention to the strength of engine components and to the accuracy of...

product ranges. The Power Stroke is an electronically controlled, direct injection engine with a 4.11 in × 4.18 in (104.4 mm × 106.2 mm) bore and stroke creating...

Pratt & Whitney continued to develop new ideas to upgrade the engine, including water injection for takeoff in cargo and passenger planes and to give emergency...

Digifant is an Engine Management System operated by an Engine Control Unit that actuates outputs, such as fuel injection and ignition systems, using information...

increased block rigidity. Direct-injection is available on the 2.0-liter LF-VD and the DISI turbocharged L3-VDT engine introduced in 2006 for the Mazdaspeed...