Liquid–liquid extraction, also known as solvent extraction and partitioning, is a method to separate compounds or metal complexes, based on their relative...

cosmetics, inks, and liquid dye lasers. They are used in the food industry, in processes such as the extraction of vegetable oil. Liquids tend to have better...

Liquid fuels are combustible or energy-generating molecules that can be harnessed to create mechanical energy, usually producing kinetic energy; they also...

High-performance liquid chromatography (HPLC), formerly referred to as high-pressure liquid chromatography, is a technique in analytical chemistry used...

An ionic liquid (IL) is a salt in the liquid state at ambient conditions. In some contexts, the term has been restricted to salts whose melting point...

Liquid smoke is a water-soluble yellow to red liquid used as a flavoring as a substitute for cooking with wood smoke while retaining a similar flavor....

resource that could be useful using GTL. Gas-to-liquids processes may also be used for the economic extraction of gas deposits in locations where it is not...

Supercritical fluid extraction Solid-liquid extraction Solid-phase extraction Maceration Ultrasound-assisted extraction Microwave-assisted extraction Heat reflux...

A reactive liquid extraction process is a liquid-liquid extraction process that is intensified through a mechanism involving a reversible reaction between...

[citation needed] The advantages of supercritical fluid extraction (compared with liquid extraction) are that it is relatively rapid because of the low viscosities...

Soil vapor extraction Paper mills Liquid ring pumps In refrigeration systems, it is common for the system to contain a mixture of liquid and gas, but...

process, which is also used for the shale oil extraction, uses hot recycled solids for the heat transfer. Liquid yields of pyrolysis and the Karrick process...

into its components. The mixture is dissolved in a fluid solvent (gas or liquid) called the mobile phase, which carries it through a system (a column, a...

reduction extraction) is a chemical method used to purify fuel for nuclear reactors or nuclear weapons. It is based on liquid–liquid extraction ion-exchange...

different techniques are required. For liquid products, a very common separation technique is liquid–liquid extraction and for solid products, filtration...

Solid-phase extraction (SPE) is a solid-liquid extractive technique, by which compounds that are dissolved or suspended in a liquid mixture are separated...

prior to DNA extraction. Liquid-liquid extractions can be carried out on digital microfluidic device by taking advantage of immiscible liquids.9 Two droplets...

cools the burning surface to avoid further damage. Solvent extraction using compressed liquid CO 2 can be used in industrial processes such as removing...

Ionic liquids have been considered as solvents in a variety of liquid-liquid extraction processes, but never commercialized. Beside that, ionic liquids have...

supercritical fluids as the extracting solvent. Extraction is usually from a solid matrix, but can also be from liquids. SFE can be used as a sample preparation...

Acid–base extraction is a subclass of liquid–liquid extractions and involves the separation of chemical species from other acidic or basic compounds....

Thin layer extraction is a time-periodic reactive liquid extraction process that provides excellent mass transfer while maintaining phase separation. It...

on the principles of liquid–liquid extraction where a chemical compound is distributed (partitioned) between two immiscible liquid phases (oil and water...

scrubbers or stripping, adsorbers such as activated carbon beds, and liquid-liquid extraction. Mass transfer is often coupled to additional transport processes...

miscible in zinc. This leads to the Parkes process, an example of liquid-liquid extraction, whereby lead containing any amount of silver is melted with zinc...

oil droplet. Olive oil extraction is the process of separating the oil from the other fruit contents (vegetative extract liquid and solid material). It...

tributyl phosphate in kerosene or dodecane is used in the liquid–liquid extraction (solvent extraction) of uranium, plutonium, and thorium from spent uranium...

precipitate to assist in the isolation of radium. The PUREX process is a liquid–liquid extraction ion-exchange method used to reprocess spent nuclear fuel, in order...

Phenol–chloroform extraction is a liquid-liquid extraction technique in molecular biology used to separate nucleic acids from proteins and lipids. Aqueous...

For some examples of this effect, see liquid-liquid extraction. It is possible to extract a solute from one liquid phase to another without a chemical reaction...