The circuit topology of an electronic circuit is the form taken by the network of interconnections of the circuit components. Different specific values...

The circuit topology of a folded linear polymer refers to the arrangement of its intra-molecular contacts. Examples of linear polymers with intra-molecular...

consisting of electrical elements (e.g., voltage sources, current sources, resistances, inductances, capacitances). An electrical circuit is a network...

Electronic filter topology defines electronic filter circuits without taking note of the values of the components used but only the manner in which those...

In electrical circuit theory, a port is a pair of terminals connecting an electrical network or circuit to an external circuit, as a point of entry or...

An RLC circuit is an electrical circuit consisting of a resistor (R), an inductor (L), and a capacitor (C), connected in series or in parallel. The name...

in a series or parallel topology. Whether a two-terminal "object" is an electrical component (e.g. a resistor) or an electrical network (e.g. resistors...

Electrical resonance occurs in an electric circuit at a particular resonant frequency when the impedances or admittances of circuit elements cancel each...

Network topology is the arrangement of the elements (links, nodes, etc.) of a communication network. Network topology can be used to define or describe...

electrical phenomena. Electrical systems are commonly described by means of a circuit diagram. These are network diagrams that describe the topology of...

together. The circuit can act as an electrical resonator, an electrical analogue of a tuning fork, storing energy oscillating at the circuit's resonant frequency...

In electrical engineering, an unbalanced circuit is one in which the transmission properties between the ports of the circuit are different for the two...

electrical current in a circuit. It is typically used to divert current away from a system or component in order to prevent overcurrent. Electrical shunts...

A bridge circuit is a topology of electrical circuitry in which two circuit branches (usually in parallel with each other) are "bridged" by a third branch...

In electrical and electronic engineering, a daisy chain is a wiring scheme in which multiple devices are wired together in sequence or in a ring, similar...

An electrical ballast is a device placed in series with a load to limit the amount of current in an electrical circuit. A familiar and widely used example...

flow depends on the input power signal, the storage elements and circuit topologies used, and also on the pattern used (e.g., pulse-width modulation with...

lumped-element model simplifies the system or circuit behavior description into a topology. It is useful in electrical systems (including electronics), mechanical...

Topology (from the Greek words τόπος, 'place, location', and λόγος, 'study') is the branch of mathematics concerned with the properties of a geometric...

Electronic filters are a type of signal processing filter in the form of electrical circuits. This article covers those filters consisting of lumped electronic...

transformer circuit topology (i.e., both ports independently excited with no short-circuited port). The dual ported transformer circuit topology is known...

unchanged. Mesh analysis Ohm's law Kirchhoff's circuit laws Circuit diagram Circuit topology (electrical) Ybus matrix Charge conservation P. Dimo Nodal...

analysis Ohm's law Kirchhoff's circuit laws Circuit diagram Circuit topology (electrical) Analysis of resistive circuits Source transformation Hayt, William...

in 1983, defining the electrical characteristics of drivers and receivers for use in serial communications systems. Electrical signaling is balanced,...

simulator, with subcircuit models that use the actual transistor topology of the integrated circuit, and finally, with inline Boolean logic expressions. Exact...

inverters are primarily used in electrical power applications where high currents and voltages are present; circuits that perform the same function for...

alternating topology, which means that CW TEs alternate with CCW TEs. Here's the same circuit in a stacked topology. The same equation applies to this circuit as...

approach in engineering Hydraulic analogy, representation of electrical circuits as hydraulic circuits Aerodynamic-Hydraulic analogy, representation of the behaviour...

likewise for short-circuit impedances which is the best known of the filter topologies. It is for this reason that ladder topology is often referred to...

a bridge circuit, it is impossible to simultaneously ground the input and output of this circuit. The Delon circuit uses a bridge topology for voltage...