A beam splitter or beamsplitter is an optical device that splits a beam of light into a transmitted and a reflected beam. It is a crucial part of many...

diffractive beam splitter (also known as multispot beam generator or array beam generator) is a single optical element that divides an input beam into multiple...

single photons enter a 1:1 beam splitter, one in each input port. When the temporal overlap of the photons on the beam splitter is perfect, the two photons...

(2005) ISBN 0-8194-5868-6. US patent 2,403,731, Stephen M. MacNeille, "Beam splitter", issued 1946-June-4  Hecht, Eugene. Optics, 2nd ed., Addison Wesley...

approximately a black-body radiator, is collimated and directed to a beam splitter. Ideally 50% of the light is refracted towards the fixed mirror and...

monochromatic requirement can be lifted if a diffraction grating is used as a beam splitter, since different wavelengths would diffract into different angles but...

of angled beam splitter or the partially silvered collimating curved mirror itself so that the observer (looking through the beam splitter or mirror)...

operators on any single qubit. The unitary matrix associated with a beam splitter B θ , ϕ {\displaystyle \mathbf {B} _{\theta ,\phi }} is: U ( B θ , ϕ...

Abraham Michelson in 1887. Using a beam splitter, a light source is split into two arms. Each of those light beams is reflected back toward the beamsplitter...

A fiber-optic splitter, also known as a beam splitter, is based on a quartz substrate of an integrated waveguide optical power distribution device, similar...

paths between the beam splitters. This can be accomplished by blocking one of the paths, or equivalently by removing the first beam splitter (and feeding the...

entering the first beam-splitter and light exiting the second beam-splitter. If photons had "decided" to enter the first beam-splitter as either waves or...

a balanced beam splitter and two photo diodes (of high quantum efficiency). Signal beam and LO need to be overlapped at the beam splitter. The two interference...

through the out-coupling beam splitter to a collimating reflector at the other end. Finally, the out-coupling beam splitter (which is a partially reflecting...

which splits the beam with a beam splitter. In the basic version of this experiment, a coherent light source, such as a laser beam, illuminates a plate...

in CLE filtered by the pinhole excites the fluorescent dye through a beam splitter and objective lens. The fluorescent emission then follows similar paths...

in the random sequence that is to be produced, a photon is sent to a beam-splitter. In such a situation, there are two possible outcomes of equal probability...

photon is subjected to a beam splitter. If one thinks in terms of a stream of photons being randomly directed by such a beam splitter to go down two paths...

position as the second beam splitter. A second beam splitter: identical to the initial one. This beam splitter is positioned opposite the first, at the intersection...

aberrations induced by the binoviewer itself. A binoviewer consists of a beam splitter which splits the image provided by the objective into two identical...

competed for a number of prizes. As a special bonus, the Eye of Horus beam splitter was unveiled at the very end, and used by each player in the championship...

mirror that was used to split it into two beams traveling at right angles to one another. After leaving the splitter, the beams traveled out to the ends...

signal field are superimposed via a beam splitter. The superimposed light is then split by another beam splitter and each signal is recorded by individual...

paths between the beam splitters. This can be accomplished by blocking one of the paths, or equivalently by removing the first beam splitter (and feeding the...

simple case of transforming a two-beam array, a universal modal unitary can be implemented using a variable beam splitter and three phase-shifters. In 1994...

through a polarizer. This linear polarized light is reflected by a beam splitter towards the objective, which focuses the light on the specimen. The...

in a two-color (red and green) system. In Process 1 (1916), a prism beam-splitter behind the camera lens exposed two consecutive frames of a single strip...

blue color ranges. Light coming in from the lens is split by a beam-splitter prism into three beams, which are then filtered to produce colored light in...

pass through image on the reverse side of the beam splitter and the reflected image through the beam splitter and combines the two eliminating the need for...

filter and a dichroic beam splitter in a cube so that the group is inserted together into the microscope. The dichroic beam splitter controls which wavelengths...