A flame ionization detector (FID) is a scientific instrument that measures analytes in a gas stream. It is frequently used as a detector in gas chromatography...

Other detectors include the Hall electrolytic conductivity detector (ElCD), helium ionization detector (HID), infrared detector (IRD), photo-ionization detector...

flame detector is a sensor designed to detect and respond to the presence of a flame or fire, allowing flame detection. Responses to a detected flame...

capture detector (ECD) is a device for detecting atoms and molecules in a gas through the attachment of electrons via electron capture ionization. The device...

pure sample while gas chromatography using a traditional detector (e.g. Flame ionization detector) cannot differentiate between multiple molecules that happen...

energy is used to ionize an analyte. It is a type of flame thermionic detector (FTD), the other being the alkali flame-ionization detector (AFID also known...

chromatography: Flame ionization detector which uses ionizing flame to detect most hydrocarbon molecules Flame photometric detector which uses atomizing flame to get...

exothermic chemical reaction made in a thin zone. When flames are hot enough to have ionized gaseous components of sufficient density, they are then...

point sensor Infrared open path detector Flame ionization detector Nondispersive infrared sensor Photoionization detector Zirconium oxide sensor cell Catalytic...

A pulsed discharge ionization detector (pulsed discharge detector) is a detector for gas chromatography that utilizes a stable, low powered, pulsed DC...

concentrations of carbon monoxide and carbon dioxide. It consists of a flame ionization detector, preceded by a hydrogenating reactor, which converts CO2 and CO...

Thermo Fisher, PerkinElmer and others. But also data formats from other detector types are supported recently. OpenChrom supports only the analysis and...

T.; Fukusaki, E. (2015). "Application of gas chromatography/flame ionization detector-based metabolite fingerprinting for authentication of Asian palm...

external wiring. Ionization smoke detectors are usually less expensive to manufacture than optical detectors. Ionization detectors may be more prone...

concentrations usually involves the use of a flame ionization detector (FID) and a thermal conductivity detector (TCD). Most systems also employ a methanizer...

inorganic compound Total hydrocarbon content, measured using a flame ionization detector Tuyamuyun Hydro Complex, interconnected reservoirs and canals...

essential oil compounds performed by gas chromatography with a flame ionization detector linked to a mass spectrometer (GC-FID-MS) show the main components...

(GC), after the column and before a flame ionization detector (FID), to make the response factor of the detector uniform for all carbon-based species...

easiest to think of the detector in this manner. Flame ionization detector (FID) -- uses a flame to produce ions Electron capture detector (ECD) -- uses beta...

Geiger counter Geiger–Müller tube Ionization chamber Gaseous ionization detectors Neutron detection Particle detector Proportional counter Scintillator...

coupled to a flame ionization detector (FID) GCs can detect hydrocarbons at the parts per trillion levels. Using electron capture detectors, GCs are also...

chromatographic resolution, and can be used in conjunction with a flame ionization detector (GC/FID) or a mass spectrometer (GC-MS). The method is especially...

the ionization process occurring mostly at the base of the flame, making it more difficult for the electrode further from the base of the flame to attract...

thermal conductivity detector, described in 1954 by N. H. Ray, was the foundation for several other methods: the flame ionization detector was described by...

commonly used GC detectors such as the electron capture detector (ECD), flame ionization detector (FID), and thermal conductivity detector (TCD) produce...

Directorate, an intelligence service of Syria Alkali flame-ionization detector, a type of flame thermionic detector (FTD) used in gas chromatography Anti-felon...

second dimension, suitable detectors are needed. Examples include flame ionization detector (FID), (micro) electron capture detector (μECD) and mass spectrometry...

Atmospheric pressure chemical ionization (APCI) is an ionization method used in mass spectrometry which utilizes gas-phase ion-molecule reactions at atmospheric...

molecule is then measured by traditional GC detectors (i.e. flame ionization detector or thermal conductivity detector). Measuring how the retention time changes...

cases in excess of 30 C. A laboratory C12+ GC analysis using a Flame Ionization Detector (FID) can reduce the error further. However, using a C12 laboratory...