Fuel injection is the introduction of fuel in an internal combustion engine, most commonly automotive engines, by the means of a fuel injector. This article...

gasoline (petrol), where fuel is injected into the combustion chamber. This is distinct from manifold injection systems, which inject fuel into the intake manifold...

complete combustion. The injection timing and measuring of the fuel amount can be controlled either mechanically (by a fuel distributor), or electronically...

rail direct fuel injection is a direct fuel injection system built around a high-pressure (over 2,000 bar or 200 MPa or 29,000 psi) fuel rail feeding...

non-direct-injection gasoline engines, as unburned fuel is not present during valve overlap, and therefore no fuel goes directly from the intake/injection to...

Programmed Fuel Injection, or PGMFI/PGM-FI, is the name given by Honda to a proprietary digital electronic multi-point injection system for internal combustion...

both port fuel injection and direct fuel injection. The engine is equipped with cylinder deactivation technology, implemented by stopping fuel delivery...

two existing diesel engine technologies: Direct injection— where a fuel injector sprays the diesel fuel directly into the main combustion chambers. This...

Fuel injection in NASCAR was introduced in 2012, having previously been announced for 2011, which was the last season to see the premier NASCAR series...

jacketed fuel injection pipe (also known as double walled, twin walled or sheathed fuel injection pipe) is a special type of fuel injection pipe fitted...

Indirect injection in an internal combustion engine is fuel injection where fuel is not directly injected into the combustion chamber. Gasoline engines...

Landenfeld (January 2004). "Advanced Emissions and Fuel Economy Control Using Combined Injection of Gasoline and Hydrogen in SI-Engines". SAE Technical...

injected engines use either electric fuel pumps mounted inside the fuel tank (for lower pressure manifold injection systems) or high-pressure mechanical...

CDT carburetor, and the latter bored out to 2299 cc had KE-Jetronic fuel injection. The six cylinder petrol range had the 260E and 300E models. Unlike...

onboard computer which controlled the injection system; however, 15 of the 16 300D cars built with the fuel injection option were recalled and retrofitted...

comparing contemporary directly fueled petrol engines with direct-injection diesel engines. Petrol can burn faster than diesel fuel, allowing higher maximum...

made 368 kW (500 hp) of power. The start of direct fuel injection was a key part in decreasing fuel consumption figures of the Cayenne models in the New...

the 1982 model year. These were also the first Firebirds with factory fuel injection, four-speed automatic transmissions, five-speed manual transmissions...

multi-port fuel injection, some have D4 direct injection, and others have a combination of direct injection and multi-port fuel injection or D4-S. The...

at 5000 rpm Valve train: 24-Valve SOHC Induction/Fuel Delivery: Naturally Aspirated – Direct Injection 2005–2007 Honda Accord Hybrid Displacement: 3.0 L;...

at low engine RPM, and achieved significantly better fuel mileage. Due to the direct fuel injection, the 6BT has no glowplugs. The 6BTA is Turbocharged...

uses D-4D Common Rail (Common rail direct fuel injection) technology. The manufacturer's default injection timing is 6.5 deg before TDC. The only major...

adoption of central fuel injection and a catalytic converter. The introduction of Euro III led to the adoption of multi point injection, but power remained...

Stroke has "single shot" HEUI (hydraulically actuated electronic unit injection) fuel injectors which were AA code injectors unless from California where...

management system in the Saab Trionic range. It controls ignition, fuel injection and turbo boost pressure. The system was introduced in the 1993 Saab...

high-pressure integrated direct fuel injection system for diesel engines, combining the injector nozzle and the injection pump in a single component. The...

engines. However, achieving consistent fueling across all cylinders was problematic prior to the adoption of fuel injection. Straight-five engines are typically...

plastic intake manifold fuel system, ignition system & management common-rail multi-point electronic sequential indirect fuel injection (MPI) with three...

throttle-body fuel injection and roller lifters. For the 1992 Magnum update, the throttle-body fuel injection was upgraded to a multi-port fuel injection system...

used fuel injection instead of carburetors, as the compression-based combustion of diesel requires the greater precision and pressure of fuel injection. The...