• Thumbnail for Hole saw
    A hole saw (also styled holesaw), also known as a hole cutter, is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece...
    8 KB (1,108 words) - 07:03, 27 September 2023
  • Thumbnail for Circular saw
    spinning around an arbor. A hole saw and ring saw also use a rotary motion but are different from a circular saw. Circular saws may also be loosely used...
    16 KB (2,196 words) - 13:50, 4 May 2024
  • the abrasive saw is not a saw in technical terms. Hole saw: ring-shaped saw to attach to a power drill, used for cutting a circular hole in material....
    33 KB (4,829 words) - 21:38, 11 May 2024
  • Thumbnail for Annular cutter
    cutter, broach cutter, trepanning drill, hole saw, or cup-type cutter) is a form of core drill used to create holes in metal. An annular cutter, named after...
    17 KB (2,285 words) - 10:41, 13 April 2024
  • Thumbnail for Chainsaw
    Chainsaw (redirect from Chain saw)
    saw power head has two oil holes, one on each side. These holes must match with the outlet of the oil pump. The pump sends the oil through the hole in...
    40 KB (5,184 words) - 01:24, 31 May 2024
  • is the tenth installment in the Saw film series, serving as both a direct sequel to Saw (2004) and a prequel to Saw II (2005). It stars Tobin Bell and...
    44 KB (4,334 words) - 16:49, 22 May 2024
  • Thumbnail for Drill bit
    Drill bit (category Hole making)
    to create holes, almost always of circular cross-section. Drill bits come in many sizes and shapes and can create different kinds of holes in many different...
    52 KB (7,973 words) - 19:11, 12 May 2024
  • John and the Hole is a 2021 American coming-of-age psychological thriller film directed by Pascual Sisto and written by Nicolás Giacobone. A feature-length...
    15 KB (1,274 words) - 16:27, 13 March 2024
  • fabrication of circular tube is thus most commonly done with a rotary hole saw in which a hole saw of the diameter of the tube being attached to is fed into the...
    6 KB (837 words) - 14:30, 18 June 2021
  • Thumbnail for Pencil sharpener
    may have non-standard-sized alignment guide-holes, making sharpening attempts difficult. If the alignment hole is too small, the pencil cannot be inserted...
    20 KB (2,312 words) - 17:40, 6 June 2024
  • Thumbnail for Core drill
    drill specifically designed to remove a cylinder of material, much like a hole saw. The material left inside the drill bit is referred to as the core. Core...
    5 KB (626 words) - 00:55, 6 December 2023
  • Thumbnail for Hole (band)
    Hole was an American alternative rock band formed in Los Angeles, California, in 1989. It was founded by singer and guitarist Courtney Love and guitarist...
    101 KB (10,118 words) - 15:46, 29 May 2024
  • In golf, a hole in one or hole-in-one (also known as an ace, mostly in American English) occurs when a ball hit from a tee to start a hole finishes in...
    14 KB (1,526 words) - 20:00, 13 May 2024
  • Thumbnail for Drill
    Drill (category Hole making)
    A drill is a tool used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver chuck. Hand-operated types are dramatically...
    34 KB (4,601 words) - 18:10, 5 June 2024
  • Thumbnail for Blade
    edge. Design variations, such as serrated edges found on bread knives and saws, serve to enhance this force concentration, adapting blades for specific...
    29 KB (4,286 words) - 23:07, 29 March 2024
  • inserted. Hot tapping is also the first procedure in line stopping, where a hole saw is used to make an opening in the pipe, so a line plugging head can be...
    4 KB (579 words) - 06:30, 14 November 2022
  • Thumbnail for Keyhole saw
    through soft materials such as drywall without drilling a hole for the blade. Compass saws typically feature a larger, coarser blade, and are designed...
    2 KB (242 words) - 07:58, 18 March 2024
  • Thumbnail for Tubular pin tumbler lock
    very little time; it is also possible to defeat them by drilling with a hole-saw drill bit. Standard tubular-lock drill bit diameters are 0.375 in (9.5 mm)...
    4 KB (423 words) - 21:18, 6 February 2024
  • character and the primary antagonist of the Saw franchise. Jigsaw made his debut in the first film of the series, Saw, and appears in all subsequent installments...
    47 KB (6,305 words) - 02:36, 5 June 2024
  • Thumbnail for Mandrel
    finished product. A hole saw usually attaches to a mandrel, the latter being basically a drill bit with threads to secure the saw. Mandrels are not recent...
    9 KB (1,229 words) - 13:52, 9 October 2023
  • Saw II is a 2005 horror film directed by Darren Lynn Bousman and written by Leigh Whannell and Bousman. It is the sequel to 2004's Saw and the second installment...
    51 KB (5,405 words) - 12:23, 2 June 2024
  • Thumbnail for The M. K. Morse Company
    bi-metal hole saws, and later in 1974, Morse began manufacturing hole saw arbors. In 1978, Morse patented the industry's first one-piece hole saw called...
    4 KB (348 words) - 20:22, 4 February 2022
  • much of the day, but a double bogey on the 16th hole saw him fall back; a closing birdie on the 18th hole meant he tied Steven Bottomley's clubhouse score...
    15 KB (873 words) - 13:56, 26 January 2024
  • Thumbnail for Pilot hole
    referred to as a pilot hole. Skates, Scott - Saws on (2023-02-09). "How to Drill Pilot Holes (Why, When & Correct Size)". Saws on Skates. Retrieved 2023-06-13...
    5 KB (634 words) - 07:34, 23 April 2024
  • Thumbnail for Saw pit
    development of steam-powered sawing machines, saw pits were unnecessary, and therefore were cut up and sold as post-holes. Saw pits were introduced into...
    16 KB (2,252 words) - 18:09, 10 January 2024
  • Saw V is a 2008 horror film directed by David Hackl, in his directorial debut, from a screenplay by Patrick Melton and Marcus Dunstan. It is the fifth...
    23 KB (2,647 words) - 22:26, 24 April 2024
  • A memory hole is any mechanism for the deliberate alteration or disappearance of inconvenient or embarrassing documents, photographs, transcripts or other...
    6 KB (659 words) - 19:53, 2 June 2024
  • Thumbnail for List of Saw characters
    films: Saw (2004), Saw II (2005), Saw III (2006), Saw IV (2007), Saw V (2008), Saw VI (2009), Saw 3D (2010), Jigsaw (2017), Spiral (2021), and Saw X (2023)...
    176 KB (22,998 words) - 08:52, 6 June 2024
  • Thumbnail for Down the rabbit hole
    title was, "Chapter One – Down the Rabbit Hole". Alice follows a white rabbit with pink eyes because she saw the rabbit checking a pocket watch. She chases...
    8 KB (783 words) - 23:23, 30 May 2024
  • who, while fishing in the area of the hole, saw a green banana skin floating in the water. In August 2020 the hole was explored by diver Marty Watson and...
    6 KB (490 words) - 05:48, 26 August 2023