liquids. For a liquid film on flat surfaces, the liquid-vapor interface keeps flat to minimize interfacial area and system free energy. For a liquid film...

to measure the local electrochemical behavior of liquid/solid, liquid/gas and liquid/liquid interfaces. Initial characterization of the technique was credited...

results in cooling a liquid below the freezing point ahead of the solid–liquid interface. When solidifying a liquid, the interface is often unstable, and...

Liquid Interface is a symphony in four movements for electronica and orchestra by the American composer Mason Bates. The work was commissioned by the National...

applications. In addition to the liquid chromatography and mass spectrometry devices, an LC–MS system contains an interface that efficiently transfers the...

membrane while surface tension is an inherent property of the liquid–air or liquid–vapour interface. Because of the relatively high attraction of water molecules...

Continuous Liquid Interface Production (CLIP; originally Continuous Liquid Interphase Printing) is a proprietary method of 3D printing that uses photo...

interfacial tension at an air–liquid or liquid–liquid interface. In this method, the plate is oriented perpendicular to the interface, and the force exerted...

the excess energy at the liquid-solid interface to accommodate the structural changes at the interface. For a spherical interface, the Gibbs–Thomson equation...

a liquid surface and a solid surface where they meet. More specifically, it is the angle between the surface tangent on the liquid–vapor interface and...

Air liquid interface cell culture (ALI) is a method of cell culture by which basal stem cells are grown with their basal surfaces in contact with media...

crystal growth can subsequently occur from nucleated seeds at the liquid–solid interface. The physical characteristics of nanowires grown in this manner...

Liquid–liquid extraction, also known as solvent extraction and partitioning, is a method to separate compounds or metal complexes, based on their relative...

that arises among small colloidal particles attached to an interface between immiscible liquids. The particles are held there by surface tension. Normally...

typology of gas–liquid contactor more suitable for a particular application are: liquid hold-up surface area of the gas–liquid interface. In particular...

gas-liquid interface, which encourages some of the dissolved gas(es) to diffuse into the sparging gas before the sparging gas escapes from the liquid. Many...

the angle connecting the solid–liquid interface and the liquid–gas interface (as in the figure). If θ = 0°, the liquid completely wets the substrate....

occur at the interface of two phases, including solid–liquid interfaces, solid–gas interfaces, solid–vacuum interfaces, and liquid–gas interfaces. It includes...

where the liquid-liquid interface is the working electrode. This can be done by placing secondary electrodes in each phase and close to interface each phase...

printing include melt extrusion, light polymerization, continuous liquid interface production and sintering. There are many 3D printing processes, that...

window below a liquid resin bath. Above a permeable window, there is an oxygen inhibition “dead-zone” maintained by a liquid interface. Above the dead...

dewetting is one of the processes that can occur at a solid–liquid, solid–solid or liquid–liquid interface. Generally, dewetting describes the process of retraction...

surface – Surface representing the interface between two different fluids Du Noüy ring method – Method of measuring a liquid's surface tension Sessile drop...

the interface of two immiscible phases. These methods typically involve the liquid–liquid and liquid–solid interfaces, but a gas–liquid interface method...

of interfaces: liquid-solid interfaces, liquid-liquid interfaces, and liquid-in-liquid emulsion interfaces. In the liquid-liquid and liquid-in-liquid emulsion...

cellulose-based biofilm or microbial mat found floating at the container's air-liquid interface. This bacterial cellulose mat is sometimes called a pellicle. SCOBY...

at its interface with a liquid medium, an electromagnetic field, also known as an evanescent wave, is generated at the solid-liquid interface with the...

at the liquid-liquid interface, —the interfacial liquid marbles. Similar to liquid marbles at the solid-air interface, the interfacial liquid marbles...

A graphical user interface, or GUI, is a form of user interface that allows users to interact with electronic devices through graphical icons and visual...

conductor is brought in contact with a solid or liquid ionic conductor (electrolyte), a common boundary (interface) among the two phases appears. Hermann von...