A liquid metal ion source (LMIS) is an ion source which uses metal that is heated to the liquid state and used to form an electrospray to form ions. An...

An ion source is a device that creates atomic and molecular ions. Ion sources are used to form ions for mass spectrometers, optical emission spectrometers...

large biomolecules. A liquid metal ion source (LMIS) uses electrospray in conjunction with liquid metal to form ions. Ions are produced by field evaporation...

electrodes with piperidinium ionic liquid and lithium bis(fluorosulfonyl)imide for Li-ion batteries". Journal of Power Sources. 205: 402–407. doi:10.1016/j...

Center, and Orloff's doctoral adviser. FEI's introduction of the liquid metal ion source in 1981 led to its application in the semiconductor industry for...

constructed (see SNO). Ion source: Gallium is also used as a liquid metal ion source for a focused ion beam. For example, a focused gallium-ion beam was used to...

derived from lithium-ion and lithium-metal battery technology. The primary difference is that instead of using a liquid Lithium salt (such as lithium hexafluorophosphate...

long periods of time before being activated by heating. Rechargeable liquid-metal batteries are used for industrial power backup, special electric vehicles[citation...

An Ion gel (or Ionogel) is a composite material consisting of an ionic liquid immobilized by an inorganic or a polymer matrix. The material has the quality...

of ion source are used for SSIMS: electron-impact ionization, surface ionization, or liquid-metal ion sources. In the electron-impact ion source, electrons...

A metal-ion buffer provides a controlled source of free metal ions in a manner similar to the regulation of hydrogen ion concentration by a pH buffer A...

LC–MS as a routine analytical tool lies in the interface and ion source between the liquid-based LC and the vacuum-base MS. The following interfaces were...

Most widespread instruments are using liquid metal ion sources (LMIS), especially gallium ion sources. Ion sources based on elemental gold and iridium are...

liquid metal, leaving a positively charged metal surface and negatively charged water ions. The attraction between the charged metal and water ions will...

liquid), "ion pairs" are created by spontaneous molecule collisions, where each generated pair consists of a free electron and a positive ion. Ions are...

can be obtained. A third source type, the liquid metal ion gun (LMIG), operates with metals or metallic alloys, which are liquid at room temperature or...

absorption spectrophotometry or by potentiometry using ion-selective electrodes. Like the other alkali metals, sodium dissolves in ammonia and some amines to...

detailed structure of the metal's ion lattice. Taking into account the positive potential caused by the arrangement of the ion cores enables consideration...

advanced electrostatic space propulsion concept, a form of ion thruster, that uses a liquid metal as a propellant – usually either caesium, indium, or mercury...

A Sodium-ion battery (NIB, SIB, or Na-ion batty) is a rechargeable battery that uses sodium ions (Na+) as charge carriers. In some cases, its working...

A metal ion in aqueous solution or aqua ion is a cation, dissolved in water, of chemical formula [M(H2O)n]z+. The solvation number, n, determined by a...

xenon) ions. The cluster production process is still not fully understood. Liquid-metal ion In liquid-metal ion source a needle is wetted with the metal to...

that uses a solid electrolyte (solectro) to conduct ions between the electrodes, instead of the liquid or gel polymer electrolytes found in conventional...

intrinsic higher ion mobility, which results in high ion conductivity. Inorganic-based liquid electrolytes are made by dissolving alkali metal fluorides in...

anodes for lithium-ion batteries have been studied, they were largely dismissed as infeasible due to general incompatibility with liquid electrolytes. Developments...

A zinc-ion battery or Zn-ion battery (abbreviated as ZIB) uses zinc ions (Zn2+) as the charge carriers. Specifically, ZIBs utilize Zn metal as the anode...

Liquid–liquid extraction, also known as solvent extraction and partitioning, is a method to separate compounds or metal complexes, based on their relative...

An ion thruster, ion drive, or ion engine is a form of electric propulsion used for spacecraft propulsion. An ion thruster creates a cloud of positive...

be liquid at standard temperature and pressure; the only other element that is liquid under these conditions is the halogen bromine, though metals such...

necessary to push ions through this layer. This high potential would degrade the electrolyte during recharging. The use of the ionic liquid as an electrolyte...