Optically active additive (OAA) is an organic or inorganic material which, when added to a coating, makes that coating react to ultraviolet light. This...

Open Automotive Alliance, an organization to computerize cars Optically active additive, for use in paints and coatings Opticians Association of America...

coating Formulations Langmuir-Blodgett film Nanoparticle deposition Optically active additive, for inspection purposes after a coating operation Paint Paper...

Materials 2016: Recursive symmetries for complex additive manufacturing 2015: Additive Manufacturing of Optically Transparent Glass 2015: Flow-based fabrication...

instrument used to measure optical rotation: the angle of rotation caused by passing linearly polarized light through an optically active substance. Some chemical...

brown powders that are partially or fully water-soluble, yielding optically active solutions of low viscosity. Most of them can be detected with iodine...

essential laser-device component). His notebook included a diagram of an optically pumped laser. It also contained the first recorded use of the term "laser...

particularly known for its unusual rheological (or flow) properties. It is optically clear and, in general, inert, non-toxic, and non-flammable. It is one...

it does not interfere with the backend water chemistry. Wet-strength additives ensure that paper retains its strength when it gets wet. This is especially...

doi:10.1021/jo00210a004. Anita Schnyder, et al., "Preparation of optically active 3-hydroxytetrahydrofurans by catalytic asymmetric hydroboration of...

JP application 04-018057, Sakie, N. & Haruyo, S., "Production of Optically Active 1,2-propanediamine"  Dabelstein, W.; Reglitzky A.; Schutze A.; Reders...

27462F. PMID 19640955. Yoshida T (1970). "Industrial manufacture of optically active glutamic acid through total synthesis". Chemie Ingenieur Technik. 42...

chemical in the solution is known. If there are N {\displaystyle N} -many optically active different chemicals ('chemical species') in a solution and the molar...

acid but also an amount of optically active 2-methyloctanoic acid, which could only have formed from likewise optically active 2-methylheptyllithium with...

many usage scenarios the signal is reflected from optically rough surfaces or passes through optically turbulent media leading to wavefronts that are spatially...

compounds) was the subject of a Scientific Opinion of the Panel on Food Additives, Flavourings, Processing Aids and Food Contact Materials from the EFSA...

Magenta (/məˈdʒɛntə/) is a purple-red color. On color wheels of the RGB (additive) and CMY (subtractive) color models, it is located precisely midway between...

electro-mechanically (galvanometer scanner, micro-mirror array)) or electro-acousto-optically. Depending on the shape and on the arrangement of the picture elements...

adapted to the desired aesthetic effect, optical glass contains additives designed to modify certain optical or mechanical properties of the glass: refractive...

producing mode locking in a laser may be classified as either "active" or "passive". Active methods typically involve using an external signal to induce...

electrically conductive, chemical/oil/acid/gas resistant, low smoke emitting, optically clear, and flame-retardant. A variety of fillers can be used in silicone...

ZnO. It is a white powder which is insoluble in water. ZnO is used as an additive in numerous materials and products including cosmetics, food supplements...

assessment. It is used as an active ingredient in toothpastes as an anti-staining and tartar prevention ingredient. As a food additive, SHMP is used as an emulsifier...

palmitate and ascorbyl stearate) can be used as antioxidant food additives. Sodium-dependent active transport process enables absorption of ascorbic acid from...

errors regarding the safety of titanium dioxide (E171) particles as a food additive, and according to a 2022 review, existing evidence does not support a direct...

Selective laser melting (SLM) is one of many proprietary names for a metal additive manufacturing (AM) technology that uses a bed of powder with a source of...

'n' Tumble (Additive 1997) To Shape The Future Remix (Metalheadz 1997) Chemical #1 - Jesus Jones (Food 1997) Still - Boymerang - Dom & Optical VIP (Prototype...

microfabrication, OCT enables non-destructive testing and real-time inspection during additive manufacturing. Its high-resolution imaging detects defects, characterizes...

from the additive responses of individual sensor components. There exist several types of chemical sensor arrays including electronic, optical, acoustic...

constant is 4.5 (at 1 kHz), and its resistivity is 1.5 × 1014 Ω cm. It is optically active with [α]D24 = +59.79°. The compound slowly hydrolyzes in water: 0.25%...