Optimal cutting temperature (OCT) compound is used to embed tissue samples prior to frozen sectioning on a microtome-cryostat. This process is undertaken...

polyvinyl alcohol; this compound is known by many names and when frozen has the same density as frozen tissue. At this temperature, most tissues become rock-hard...

method Organic cation transport protein, a type of protein Optimal cutting temperature compound, used in histology Oncology clinical trial, a clinical trial...

context and on which type of cutting fluid is being considered, it may be referred to as cutting fluid, cutting oil, cutting compound, coolant, or lubricant...

molds (manually). Air temperature for softwood and semi-hardwood cuttings is optimal at around 70 °F (21.1 °C) but temperatures as low as 55 °F (12.7 °C)...

being cut, while reducing contamination that is seen in optimal cutting temperature compound (OCT) techniques. The mounted tissue section thickness varies...

Hammond K, Mies J, Radacki K, Vargas A (2012). "Ambient-Temperature Isolation of a Compound with a Boron-Boron Triple Bond". Science. 336 (6087): 1420–2...

Drill cuttings are broken bits of solid material removed from a borehole drilled by rotary, percussion, or auger methods and brought to the surface in...

light but will tolerate low light conditions. However, lower light is not optimal for an extended period of time. Insufficient amounts of sunlight can result...

darkening in the tempeh. During the fermentation process, optimal time of fermentation, temperature, oxygen, humidity, and pH levels are required to encourage...

(pinnately compound) leaves appear after the seedling reaches a height of ~6 cm. The young seedlings do well under half-shade and a temperature of ~18 °C...

reactions. Metal gas welding, cutting and brazing - The use of oxygen in gas-flame operations, such as metal welding, cutting and brazing is one of the most...

38 °C (100 °F), further sped along by high levels of humidity. This optimal temperature assists in the chemical breakdown of the tissue and promotes microorganism...

the 5-6 year period, so cutting is not done again until the 7th year. The aim of both the mechanical and the manual cutting system, is to let the shrubs...

compared to the quantity of parts produced) Cutting speeds are calculated on the assumption that optimum cutting conditions exist. These include: Metal removal...

slide called a compound rest, which provides two additional axes of motion, rotary and linear. Atop that sits a toolpost, which holds a cutting tool, which...

approximately 13. For optimal performance in high-power or high-power-density SHG of Nd:lasers, heating KTP crystals to a certain temperature (e.g., 80 °C) can...

[citation needed] The optimal germination temperature for basil seeds ranges between 34.5–39.0°C, while the base germination temperature lies between 9.8–13...

Different types of shaped charges are used for various purposes such as cutting and forming metal, initiating nuclear weapons, penetrating armor, or perforating...

not fruit every year, as winter temperatures below approximately −9 °C (16 °F) kill the flower buds. Summer temperatures above 32 °C (90 °F) may also have...

embryogenesis. Temperature serves as a critical environmental factor in plant tissue culture systems, with optimal incubation temperatures varying significantly...

also temperature-compensated. The high frequency cuts are mounted by their edges, usually on springs; the stiffness of the spring has to be optimal, as...

struggled to warm their soft compound tyre at that time of the race whereas Vettel already had the tyres at the optimum temperature.[citation needed] On lap...

researchers. The single most important factor in forming dioxin-like compounds is the temperature of the combustion gases. Oxygen concentration also plays a major...

Chromatogram – the visual output of the chromatograph. In the case of an optimal separation, different peaks or patterns on the chromatogram correspond...

damaged or killed by elements of their physical environment such as temperature, radiation, or exposure to chemicals; these effects can be exploited...

rhizome under favourable temperature and moisture conditions. The optimal growing temperature range is 18–25 °C. Yacón plants produce small, inconspicuous...

its original state, reabsorbing the heat, and returning to original temperature. This can be used to achieve refrigeration, by allowing the material...

loamy to clayey soils, porous with strong moisture-holding ability. The optimal soil pH range is 6.2–6.8. Because mulberry is a hardy crop, the soil moisture...

matter in the liquid / gas phase is cooled below a certain temperature. This temperature is called the melting point of that substance and is an intrinsic...