A solid solution, a term popularly used for metals, is a homogeneous mixture of two compounds in solid state and having a single crystal structure. Many...

In chemistry, a solution is defined by IUPAC as "A liquid or solid phase containing more than one substance, when for convenience one (or more) substance...

In metallurgy, solid solution strengthening is a type of alloying that can be used to improve the strength of a pure metal. The technique works by adding...

a solid solution. There are two sets of rules; one refers to substitutional solid solutions, and the other refers to interstitial solid solutions. For...

can be a solid, a liquid, or a gas, while the solvent is usually solid or liquid. Both may be pure substances, or may themselves be solutions. Gases are...

solid-liquid solution is divided into two halves of equal volume, the halves will contain equal amounts of both the liquid medium and dissolved solid...

defined as follows: Liquid → cooling eutectic temperature α  solid solution   +   β  solid solution {\displaystyle {\text{Liquid}}\quad...

may not always be soluble in the solid state. If the metals remain soluble when solid, the alloy forms a solid solution, becoming a homogeneous structure...

attributed the high configurational entropy as the mechanism stabilizing the solid solution phase. Cantor did the first work in the field in the late 1970s and...

In solid solution strengthening, a soluble alloying element is added to the material desired to be strengthened, and together they form a “solid solution”...

a homogeneous solid solution. Quenching: Rapid cooling (quenching) after solution annealing freezes the high-temperature solid solution, preventing the...

each other and substitution between them occurs, resulting in several solid solution series. The alunite supergroup has the general formula AB3(TO4)2(OH)6...

solid solution series, at least at elevated temperature. Ferrous iron usually substitutes freely for magnesium in amphiboles to form continuous solid...

solid solution series between carrollite and linnaeite. Also, Ni substitutes for both Co and Cu in the carrollite structure, giving a solid solution from...

crystal vacancies. Inconel's high-temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy. Inconel...

plagioclase feldspar. Only limited solid solution occurs between K-feldspar and anorthite, and in the two other solid solutions, immiscibility occurs at temperatures...

innovations. Superalloys develop high temperature strength through solid solution strengthening and precipitation strengthening from secondary phase precipitates...

rates tend to be opaque indicating partial phase separation in the solid solution (likely due to diffusion in the crystals remaining in the high temperature...

where both metals are liquid).: 232  A solid state example is the palladium-hydrogen system which has a solid solution phase (H2 in Pd) in equilibrium with...

alloy to make sure that a second phase is not created. In general, the solid solution strengthening depends on the concentration of the solute atoms, shear...

slip systems, although this effect is much less pronounced in FCC. Solid solution strengthening also increases the CRSS compared to a pure single component...

In an aqueous solution, precipitation is the "sedimentation of a solid material (a precipitate) from a liquid solution". The solid formed is called the...

material: solution heat treating and precipitation heat treating. Solid solution strengthening involves formation of a single-phase solid solution via quenching...

occur as included silver sulfide mineral phases or as limited silver in solid solution within the galena structure. These argentiferous galenas have long been...

luster, and its solubility in nitric acid. Mimetite forms a complete solid solution series with pyromorphite, with phosphate (PO3− 4) substituting for arsenate...

mixtures. In 1921, Lars Vegard discovered that the lattice parameter of a solid solution of two constituents is approximately a weighted mean of the two constituents'...

mineral with a specific chemical composition, plagioclase is a continuous solid solution series, more properly known as the plagioclase feldspar series. This...

Fe3O4. Magnetite is one part FeO and one part Fe2O3, rather than a solid solution of wüstite and hematite. Magnetite is termed a redox buffer because...

corundum (Al 2O 3) and ilmenite (FeTiO 3). With this it forms a complete solid solution at temperatures above 950 °C (1,740 °F). Hematite occurs naturally in...

his garnierite samples lie between the serpentine solid solution series and the sepiolite solid solution series. In 2008, yet another study used X-ray diffraction...