Structural shape rolling, also known as shape rolling and profile rolling, is the rolling and roll forming of structural shapes by passing them through...

are grouped together into rolling mills that can quickly process metal, typically steel, into products such as structural steel (I-beams, angle stock...

processed via rotary piercing, structural shape rolling and profile rolling. Common final products include structural shapes, rails, rods, and seamless pipes...

pressure rolls, or sharp, sheared metal edges. Sheet metal Skin-pass Structural shape rolling Tube beading Roll bending Drawer slides roll forming machine Todd...

An I-beam is any of various structural members with an Ɪ- (serif capital letter 'I') or H-shaped cross-section. Technical terms for similar items include...

shape measuring one half of the waterway's width at that point. The bridge won the British Constructional Steelwork Association's British Structural Steel...

mechanical engineering, a rolling-element bearing, also known as a rolling bearing, is a bearing which carries a load by placing rolling elements (such as balls...

thick as 1 in. (25.4 mm) can also be cold-formed successfully into structural shapes (AISI, 2007b). The use of cold-formed steel members in building construction...

Structural violence is a form of violence wherein some social structure or social institution may harm people by preventing them from meeting their basic...

U-girders Box girder Joist Plate girder Structural steel Truss Universal beam Wide Flange Steel Materials and Rolling Processes (U.S.) Hirol, Isami (2008)...

In statistics, a moving average (rolling average or running average or moving mean or rolling mean) is a calculation to analyze data points by creating...

the buck-tail of the rivet, rolling an edge so that it is flush against the material. Until relatively recently, structural steel connections were either...

rollers add to sheet metal prevent warping and disfigurement by adding structural integrity to the metal. Bead rollers also can be used in an artistic and...

6 mm (0.25 in) are considered plate, such as plate steel, a class of structural steel. Sheet metal is available in flat pieces or coiled strips. The coils...

by the architectural firm of Simon & Simon in a classic 1920's horseshoe shape resembling Harvard Stadium, which was built in 1903. The seating enclosed...

frame is made up of structural elements called the rails or beams. These are ordinarily made of steel channel sections by folding, rolling, or pressing steel...

of metal after it exits a rolling mill, extrusion die, or drawing processes, including sheet, bar, plate, or structural shapes. This texture is usually...

(solidification of the liquid steel), roughing rolling/billet rolling (reducing size of blocks) product rolling (finished shapes). The principal raw materials for...

because they are often used in automotive applications. Controlled rolling Controlled rolling is a method of refining the grain of steel by introducing a large...

The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a hydrodynamic and...

for suitability for different usages, the hull shape being dependent upon the needs of the design. Shapes range from a nearly perfect box, in the case of...

component of a machine. These elements consist of three basic types: structural components such as frame members, bearings, axles, splines, fasteners...

wheel specially designed for use on railway tracks. The wheel acts as a rolling component, typically press fitted on to an axle and mounted directly on...

warping designs involved flexing of structural members, they were difficult to control and liable to cause structural failure. Ailerons had begun to replace...

the load produced by a rolling vehicle wheel. The load pulse is produced by dropping a large weight onto a "buffer" which shapes the pulse, and then transmitted...

excessive temperature during or too-rapid rolling.: 144–151  By 1890 steel had largely replaced iron for structural applications. Sheet iron (Armco 99.97%...

facilities in Colorado and Alberta. The company produces items such as structural tubing, pipes, and steel rails. Oregon Steel began as Gilmore Steel in...

rolling a blank cylinder of steel through a series of dies to create the desired shape. These create standardized I-beam and wide flange beam shapes up...

The rolled steel "profile" or cross section of steel columns takes the shape of the letter "Ɪ". The two wide flanges of a column are thicker and wider...

Some women undergo vaginoplasty or vulvoplasty procedures to alter the shape of their vulvas to meet personal or societal aesthetic standards. The surgery...