related to Turbomeca Marboré. Iconic's Marbore IIC Aircraft fitted with MARBORE II or VI minijets website Marboré I Minijets website Marboré II / IV...

Aviation and Engineering (CAE) under license from Turbomeca. The J69 was a development of the Turbomeca Marboré II. It powered a number of U.S. drones, missiles...

with Turbomeca Marboré II engines; 761 were built including 188 in West Germany, 62 in Finland and 50 in Israel. CM.170-2 Magister uprated Marboré VI engines...

The Turbomeca Arrius is one of a family of turboshaft engines for helicopter use, first produced in 1981. As of 2012, some 2,700 units had been sold....

(731 hp) equivalent. Potez 840 4x 440shp (328 kW) Turboméca Astazou II Potez 842 4x 600shp (447 kW) Turboméca Astazou XII SFERMA Nord 1110 SFERMA SF-60 Marquis...

Rolls-Royce Turbomeca Marboré Turbomeca Palas Turbomeca Palouste Turbomeca Gabizo Turbomeca Astafan Turbomeca Aubisque Rolls-Royce Turbomeca Adour - joint...

earlier Turbomeca Marboré turbojet was originally intended for the Saab 105, but when Saab needed more thrust than the Marboré produced, Turbomeca offered...

Rolls-Royce Turbomeca Limited (RRTM) is a joint venture between British aero-engine manufacturer Rolls-Royce plc (UK) and French helicopter engine specialist...

gallons in wing tanks, 125 gallons in tip tanks. Powerplant: 2 × Turboméca Marboré II turbojets, 3.9 kN (880 lbf) thrust each Performance Maximum speed:...

The Turbomeca Makila is a family of French turboshaft engines for helicopter use, first run in 1976 and flown in 1977. Typical power output is around...

The Turbomeca Aspin was a small French turbofan engine produced by Turbomeca in the early 1950s. This geared turbofan design was the first turbofan to...

Turbomeca RTM322 is a turboshaft engine produced by Safran Helicopter Engines. It was originally conceived and manufactured by Rolls-Royce Turbomeca Limited...

The Turbomeca TM 333 is a turboshaft engine manufactured by French company Turbomeca and designed for helicopters weighing 4-5 tonnes. It first ran in...

featured additional engines in the form of a pair of wing-tip mounted Turbomeca Marboré turbojets, giving it improved takeoff performance. The proposed 2506...

The Turbomeca Palouste is a French gas turbine engine, first run in 1952. Designed purely as a compressed air generator, the Palouste was mainly used...

The Turbomeca Artouste is an early French turboshaft engine, first run in 1947. Originally conceived as an auxiliary power unit (APU), it was soon adapted...

: 1872  Using this medium-bypass version of the Astafan instead of the Turbomeca Marboré, the 90 had twice the range of the Magister (with a similar fuel load)...

S. T.5.510, the CT.20 was built by Nord Aviation and powered by a Turbomeca Marboré II engine, providing a top speed of 900 km/h (560 mph; 490 kn) and...

The Turbomeca Bastan was a turboprop engine developed in France in 1957. Early models developed 650 shp (485 kW), but by 1965 this had been increased...

The Turbomeca Palas is a diminutive centrifugal flow turbojet engine used to power light aircraft. An enlargement of the Turbomeca Piméné, the Palas was...

The Turbomeca Arriel is a series of French turboshaft engines that first ran in 1974. Delivering 650 to 1,000 hp (480 to 750 kW), over 12,000 Arriel engines...

production. From the 1950s-1970s, CAE built a licensed version of the Turbomeca Marboré as the Teledyne CAE J69. In 1969, Teledyne Incorporated acquired Continental...

had a gross weight of 7,650 lb (3.47 t), initially powered by two Turboméca Marboré turbojets of 880 lbf (3.9 kN) thrust, although most aircraft were...

The Turbomeca Turmo is a family of French turboshaft engines manufacturered for helicopter use. Developed from the earlier Turbomeca Artouste, later versions...

by China National Aero-Engine Corporation (CAREC). Similar to the Turboméca Marboré. WP-12 WP-13 39.9/63.7 kN Chengdu J-7 A Chinese engine based on the...

The Turbomeca Gabizo was a small turbojet engine produced by Turbomeca from the 1950s. The components were designed to take the stresses of high-speed...

The 900 kg (2,000 lb) missile was propelled by a 400 kg (880 lb) Turbomeca Marboré IID jet engine and launched using a pair of rockets mounted on a launch...

(4,740 lb) Max takeoff weight: 3,200 kg (7,055 lb) Powerplant: 2 × Turbomeca Marboré IIA turbojets, 3.92 kN (882 lbf) thrust each Performance Maximum speed:...

contracted with Turbomeca to develop a more powerful version of the ALH's TM 3332B2, from 747 to 800 kW (1,002 to 1,073 hp). By January 2002, Turbomeca had begun...

and straightforward" stall characteristics. Early on, the French Turbomeca Marboré turbojet engine had been selected to power the type; Spain had successfully...