In internal combustion engines, water injection, also known as anti-detonant injection (ADI), can spray water into the incoming air or fuel-air mixture...

Water injection may refer to: Water injection (engine), for increasing efficiency or power of internal combustion engines Water injection (oil production)...

multi-port fuel injection, some have D4 direct injection, and others have a combination of direct injection and multi-port fuel injection or D4-S. The GR...

with turbocharger and common rail direct injection. The Mercedes OM602 engine is a 5-cylinder diesel engine of 2.5 or 2.9 L (2,497 or 2,874 cc). The 2...

diesel engine with indirect injection manufactured by Mercedes-Benz between 1993 and 2001. It replaced the single overhead camshaft (SOHC) OM603 engine. It...

started with the 1UR-FSE engine with D-4S direct injection for the 2007 Lexus LS. The series launched with a die-cast aluminum engine block, aluminum cylinder...

Manifold injection is a mixture formation system for internal combustion engines with external mixture formation. It is commonly used in engines with spark...

metered by multipoint fuel injection or direct injection. Some variants are turbocharged. Since 2013, some of the K engines range have been upgraded with...

belt-driving engine accessories and optimizing the dimensions of the base engine. The injection pattern has been altered to have two pilot injections over a...

non-direct-injection gasoline engines, as unburned fuel is not present during valve overlap, and therefore no fuel goes directly from the intake/injection to...

An injection pump is the device that pumps fuel into the cylinders of a diesel engine. Traditionally, the injection pump was driven indirectly from the...

Unlike earlier diesel engines the B-series Cummins used direct injection and did not need glow plugs for cold starting. The engine was first manufactured...

Thrust reversal Turbojet development at the RAE Variable cycle engine Water injection (engine) Note: In Newtonian mechanics kinetic energy is frame dependent...

turbocharged, direct-injection gasoline engines produced by Ford and originally co-developed by FEV Inc. (now FEV North America Inc.). EcoBoost engines are designed...

The magnesium injection cycle (MAGIC) is an engine design under development by Mitsubishi Corporation and the Tokyo Institute of Technology that uses magnesium...

kilowatts). The engine features common rail Direct injection and a variable nozzle turbocharger. The injection system operates at 1,600 bar (23,000 psi), while...

Work. Leonard Dyer invented a six-stroke, internal combustion, water-injection engine in 1915, very similar to Crower's design (see below). A dozen more...

and a water pump no longer driven by it. The LDE engine meets Euro VI and KULEV emission standards. With the addition of secondary air injection to the...

prefix: 03P, ID code: CFWA engine configuration & engine displacement inline three-cylinder (R3/I3) Turbocharged Direct Injection (TDI) turbodiesel; 1,199 cc...

multi-point fuel injection (MPFI) system. Changes from the VG engine include switching to a timing chain from a timing belt, and relocating the water pump from...

mechanical injection pump. GM replaced the DB-2 with the electronic throttle DS-4 in 1994–2000 vehicles. In mid-1996, GM implemented a redesigned engine cooling...

system, it was later upgraded to Electronic Fuel Injection, with the -E suffix added to the engine designation. Toyota specified unleaded fuel with a...

0, and 3.5 L versions were also available with gasoline direct injection. This engine has been the flagship powerplant of the company except when they...

delivery, single and double pilot injection; Bosch EDC16 electronic engine control unit (ECU) exhaust system twin water-cooled exhaust gas recirculation...

Indirect injection in an internal combustion engine is fuel injection where fuel is not directly injected into the combustion chamber. Gasoline engines equipped...

controlled by an ECU include the fuel injection and ignition systems. The earliest ECUs (used by aircraft engines in the late 1930s) were mechanical-hydraulic...

Pratt & Whitney continued to develop new ideas to upgrade the engine, including water injection for takeoff in cargo and passenger planes and to give emergency...

turbine), common rail direct injection and cooled exhaust gas recirculation (EGR). There are three generations of D5 engines: The first generation was introduced...

product ranges. The Power Stroke is an electronically controlled, direct injection engine with a 4.11 in × 4.18 in (104.4 mm × 106.2 mm) bore and stroke creating...

toothed belt that also controls the diesel injection pump. A second belt rotates the alternator and water pump, while a vacuum pump located at the rear...