Controlled Permeability Formwork (CPF) is a system proven to significantly enhance the durability of surface concrete during the casting process. All concretes...

inhibit mild steel corrosion from sulfate-reducing bacteria. Controlled permeability formwork (CPF) is a method of preventing the corrosion of reinforcement...

Formwork is molds into which concrete or similar materials are either precast or cast-in-place. In the context of concrete construction, the falsework...

skyscraper located in the central business district of Singapore Controlled permeability formwork, a durability enhancing formliner used in construction This...

proportions of sand, gravel, clay, silt, and stabilizer if any, into a formwork (an externally supported frame or mold). Historically, additives such as...

plant, or often a batch plant. The usual method of placement is casting in formwork, which holds the mix in shape until it has set enough to hold its shape...

concrete (SCC) which was cohesive, but flowable and took the shape of the formwork without use of any mechanical compaction. SCC is known as self-consolidating...

concrete or plastic rebar spacers separating the rebar from the concrete formwork to establish concrete cover and ensure that proper embedment is achieved...

little cover – poor concrete. Corrosion of reinforcement bars Cover meter Formwork Rebar Reinforced concrete Steel fixer "CONCRETE COVER FOR REINFORCEMENT"...

Dredging, airlifting, waterjetting, In-water surface cleaning. Shuttering and formwork, bagwork. Reinforcement. Underwater concrete placement - Tremie, pumped...

(construction) - Clerk of the Works - Climate-adaptive building shell - Climbing formwork - Clinker brick - Close studding - Coastal engineering - Coating - Cold-formed...

directly as the support member, and sheet piles, which may be used as formwork for cast concrete, or for constructing cofferdams, to allow the enclosed...

mimic traditional materials like wood or stone. Formwork Bioplastics are increasingly used in formwork for concrete casting. They offer advantages in terms...

communist countries. Most socialist systems exercised a form of centrally controlled development and simplified methods of construction already outlined in...

between 3.5–5 m (11–16 ft), and a distance of about 2.5 m (8 ft) from the formwork has been recommended. The risk of segregation and uneven setting can be...

access for equipment and workers, while eliminating the need for concrete formwork and curing. Local soil can be used for infill when suitable and granular...

be durable when exposes to the sea and air. Careful design and quality control during fabrication help to provide long service with low maintenance. The...

keep out bugs or other vermin) Can serve as a semi-permeable vapor barrier with a better permeability rating than plastic sheeting vapor barriers and consequently...

Tactile inspection may be appropriate where visibility is poor. Erecting formwork (shuttering) and reinforcing steel for casting concrete. (civils) Underwater...

equipment such as concrete ring moulds, heavy lifting equipment, well shaft formwork, motorized de-watering pumps, and fuel can be large for people in developing...

buildings. The normal technique was to use brick facing material as the formwork for an infill of mortar mixed with an aggregate of broken pieces of stone...

waterjetting, in-water surface cleaning using brushcarts, shuttering and formwork, bagwork, and setup of reinforcement. Underwater concrete placement may...