A grease fitting, grease nipple, Zerk fitting, grease zerk, Alemite fitting, or divit is a metal fitting used in mechanical systems to feed lubricants...

to a specific point, usually from a grease cartridge to a grease fitting or 'nipple'. The channels behind the grease nipple lead to where the lubrication...

built into them. If the idler arm is fitted with grease fittings, these should be lubricated with a grease gun at each oil change. "What is an idler arm...

Grease 2 is a 1982 American musical romantic comedy film, and a standalone sequel to the 1978 film Grease, adapted from the 1971 musical of the same name...

use only a special grease or nothing at all (if the mating surfaces are sufficiently precisely formed). Although flange fittings are bulky, they perform...

A compression fitting is a fitting used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. In instances where...

A grease trap (also known as a grease interceptor, grease recovery device, grease capsule, or grease converter) is a plumbing device (a type of trap) designed...

them effectively. Nonsealed bearings often have a grease fitting, for periodic lubrication with a grease gun, or an oil cup for periodic filling with oil...

refrigerators, among other products, and produced the ubiquitous "zerk" grease fitting, named after its inventor, associated with the company. In the last...

"surface check" grease fitting that would help to prevent dirt from entering through a fitting. Lincoln had developed many advances in fittings including the...

they are "lubed for life". Formerly most ball joints had grease fitting (sometimes called a grease zerk) and were designed for periodic addition of a lubricant...

ways, even vertically. The oil is applied to the ways with either grease fittings, or is sometimes continuously pumped through ducts machined into the...

brake system analyzers, tire inflation systems, and tools to unclog grease fittings. IPA won the PTEN Innovation Award in 2011 and 2012, for their automotive...

and the other would have an outer (or female) joint of a correspondingly fitting taper with the ground glass surface facing inward. To connect the hollow...

lower-than-recommended viscosity is used. Lubrication can be done with a grease, which has advantages that grease is normally held within the bearing releasing the lubricant...

service ell) is a type of plumbing or piping fitting intended to join a piece of pipe and another fitting at an angle. The difference between a street...

(plumbing), a type of pipe fitting Spoke nipple, which binds each spoke to a bicycle wheel rim Grease nipple, used to put grease into a gearbox or moving...

parts that remain invariant in practice despite theoretical variability. "Greasing" an extension point, where some implementations indicate support for non-existent...

gasket or O-ring fittings. Plastic pipes used in manufacturing. Plastic pipe fittings include PVC pipe fittings, PP / PPH pipe fitting mould, PE pipe and...

These tools are effective at removing soft obstructions like hair and grease that accumulate near the drain inlet. However, excessive use of chemical...

matches may be won by achieving an effective hold of the kisbet, the loose-fitting leather pants worn during oil wrestling. Thus, the wrestler aims to control...

as the use of welding to fasten bipod legs to the clevis joint and grease fittings dissimilar to those used by the US model. The collimator sight for...

which were swapped partway through the trip, primarily because some grease fittings on the train could not withstand the entire journey at high speed....

several types of wrench that are designed to turn threaded pipe and pipe fittings for assembly (tightening) or disassembly (loosening). The Stillson wrench...

themselves with silicone grease. The cable and satellite television entities (as a near standard practice) use compression fittings with F connectors on customer...

barb, and quick-connect fittings. In the 1980s, the use of quick-connector systems became increasingly popular. These are fittings that attach to the hose...

and other risks normal to the construction industry. Piping and plumbing fitting "Steamfitter/Pipefitter: School of Trades and Technology". Thompson Rivers...

engineering Vacuum grease "KF (QF) Flanges Technical Notes". Kurt J. Lesker Company. Retrieved 2007-09-02. "ISO KF Flanges and Fittings" (PDF). Archived...

high-pressure oxygen, the grade of tape must also be known to be free from grease. Thread seal tape used in plumbing applications is most commonly white,...

is usually packed with string which has been soaked in tallow or similar grease. The gland nut allows the packing material to be compressed to form a watertight...