A multivibrator is an electronic circuit used to implement a variety of simple two-state devices such as relaxation oscillators, timers, latches and flip-flops...

control theory. The first relaxation oscillator circuit, the astable multivibrator, was invented by Henri Abraham and Eugene Bloch using vacuum tubes during...

that the Schmitt trigger possesses memory and can act as a bistable multivibrator (latch or flip-flop). There is a close relation between the two kinds...

kernels starting with 2.6.18. High Precision Event Timer Monostable multivibrator NE555 "Bran's Kernel Development Tutorial: The Programmable Interval...

"Vibrator", a song by Electric Six, on their second album Senor Smoke Multivibrator, an electronic circuit to implement a variety of simple devices Vibroseis...

triode vacuum tube. It may be used as an amplifier, mixer, oscillator or multivibrator over a frequency range AF through VHF. The Russian tube is slightly...

and sometimes in Christmas lights. This is a non-electronic type of multivibrator. An electromechanical cam timer uses a small synchronous AC motor turning...

edge of the pulse is used to start a monostable multivibrator in the slave device. The multivibrator in the slave reads the data line about 30 μs after...

Alternating current Armstrong (or Tickler or Meissner) oscillator Astable multivibrator Blocking oscillator Butler oscillator Clapp oscillator Colpitts oscillator...

applications such as frequency counters. It is also used in astable multivibrators found in instruments such as function generators. A zero crossing detector...

addition of the RC circuit turns the hysteretic bistable multivibrator into an astable multivibrator. This circuit requires only a single comparator with...

Beginning -Astable Multivibrator-" Transliteration: "Bokura no Hajimari -Astable Multivibrator-" (Japanese: 僕らの始まり -Astable Multivibrator-) October 22, 2023 (2023-10-22)...

reduced-functionality timers in a 16-pin package designed primarily for monostable multivibrator applications. By 2014, many versions of 16-pin NE558 have become obsolete...

synchronization between the receiver's internal sweep circuit (sometimes a multivibrator) and the received picture signal, along with other things such as audio-video...

function Pulse wave Sine wave Triangle wave Sawtooth wave Waveform Sound Multivibrator Ronchi ruling, a square-wave stripe target used in imaging. Cross sea...

military in January 1960. In April 1960, Texas Instruments announced multivibrator #502 as the world's first integrated circuit available on the market...

method of frequency division was the use of a chain of vacuum tube multivibrators, the overall division ratio being the mathematical product of the division...

cross-coupled using positive feedback, complex behaviors can be created. These multivibrators are widely used and include: astable circuits, which act as oscillators...

Part of a ladder diagram, including contacts and coils, compares, timers and monostable multivibrators...

radio and television receiver. The basic application of the tube is in multivibrator-type horizontal-deflection circuits, AGC-amplifier and sync-separator...

unstable to make a nonlinear relaxation oscillator (astable multivibrator) or a monostable multivibrator. VCNRs are stable when R L < r {\displaystyle R_{L}<r}...

A pair of TL431s may replace transistors in a symmetrical astable multivibrator for frequencies ranging from under 1 Hz to around 50 kHz. This, again...

of the more common relaxation oscillator circuits are listed below: Multivibrator Pearson–Anson oscillator Ring oscillator Delay-line oscillator Royer...

latching circuit. An electronic flip-flop, or "latch", or "bistable multivibrator", is a circuit that due to high positive feedback is not stable in a...

have two stable states that can store state information – a bistable multivibrator. The circuit can be made to change state by signals applied to one or...

registers can also be used as pulse extenders. Compared to monostable multivibrators, the timing does not depend on component values, but it requires an...

stops the previous count. In this mode 8253 can be used as a monostable multivibrator. GATE input is used as trigger input. OUT will be initially high. OUT...

other, to produce a third audible frequency), the Ondioline uses a multivibrator oscillator circuit to produce its tone. This gives the Ondioline a tone...

decoder with 25 mA output drivers. Timers 4047 – Monostable/astable multivibrator with external RC oscillator. 4060 – 14-bit ripple counter with external...

14 MC74H120 74x121 1 monostable multivibrator Schmitt trigger 14 SN74121 74x122 1 retriggerable monostable multivibrator, clear 14 SN74LS122 74x123 2 dual...