An overhead valve engine, abbreviated (OHV) and sometimes called a pushrod engine, is a piston engine whose valves are located in the cylinder head above...

overhead valve engines (OHV), where the camshaft is located below the combustion chamber in the engine block. Single overhead camshaft (SOHC) engines...

produced in single overhead camshaft and dual overhead camshaft configurations until a V6 engine replaced it. The Nissan TB overhead valve engine was introduced...

poppet valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Flatheads were widely used internationally...

an IOE engine, the intake valves were located directly above the cylinder (like the later overhead valve engines), however the exhaust valve remains...

Austin's marine engine of 1910 produced 300 bhp and was installed in a speedboat called "Irene I"; its all-aluminium, twin-overhead-valve engine had twin magnetos...

cylinder or cylinder bank. Overhead valve engine: A single camshaft remains in the block below the cylinder(s), however the valves are located in the cylinder...

valve lifter or hydraulic lash adjuster, is a device for maintaining zero valve clearance in an internal combustion engine. Conventional solid valve lifters...

"pocket valve" being used for IOE engines. An F-head engine combines features from both overhead-valve and flathead type engines, the inlet valve operating...

of valve stem seals. Most multi-valve engines are dual overhead camshaft (DOHC) designs, but some single overhead camshaft (SOHC) multi-valve engines exist...

into opening and closing of a valve. Finger followers are used in some high-performance dual overhead camshaft (DOHC) engines, most commonly in motorcycles...

12-valve cam-in-block or overhead valve engines, except for the LQ1 which uses 24 valves driven by dual overhead cams. These engines vary in displacement...

to 1956 had a sidevalve ('flat head') engine, whereas the later XL Sportster models use an overhead valve engine. The first Sportster in 1957 had many...

The Chrysler Hemi engine, known by the trademark Hemi or HEMI, refers to a series of high-performance American overhead valve V8 engines built by Chrysler...

through 1953. During the engine's first decade of production, when overhead-valve engines were used by only a small minority of makes, it was usually known...

The Y-block engine is a family of small block overhead valve V8 automobile engines produced by Ford Motor Company. The engine is well known and named...

overhead camshaft (DOHC) diesel engine with indirect injection manufactured by Mercedes-Benz between 1993 and 2001. It replaced the single overhead camshaft...

the standard engine in the Tempest. Offered also in 1967, the 230 cu in (3.8 L) OHC 6 shared internal dimensions with the overhead valve Chevrolet straight-6...

pioneered the overhead valve engine, used the same basic engine design for Chevrolet: exposed pushrods and rocker arms which actuated valves in the detachable...

same side. Crossflow heads use overhead valves, but these can be actuated either by overhead camshafts, or by a valve-train, which has the camshafts in...

All three generations are overhead valve engines, otherwise known as pushrod engines. Overhead valve engines have the valves mounted above the cylinder...

In a piston engine, the valve timing is the precise timing of the opening and closing of the valves. In an internal combustion engine those are usually...

a 2.5 L (153 cu in) V8 engine. BMW's first V8 engine was the 1954–1965 BMW OHV V8 engine, a petrol engine with overhead valves and all-aluminum construction...

It features dual overhead cams, 16 valves in total, multi-port fuel injection, and variable valve timing in later models. The J engine was Suzuki's 'big...

4G9 engine is a series of straight-4 automobile engines produced by Mitsubishi Motors. All are 16-valve, and use both single- and double- overhead camshaft...

the Cosworth 24v derivative and later 4.0 litre SOHC engines were pushrod overhead-valve engines, with a single camshaft between the banks. The Cologne...

plugs and possibly heat dissipation fins. In more modern overhead valve and overhead camshaft engines, the head is a more complicated metal block that also...

previous Subaru EA engine. The EJ series was the mainstay of Subaru's engine line, with all engines of this series being 16-valve horizontal flat-fours...

The Ford 385 engine family is a series of “big block" overhead valve (OHV) V8 engines designed and manufactured by Ford Motor Company. The family derives...

bottom of the engine. Early flathead engines locate the valves in the block and the cam acts directly on those valves. In an overhead valve engine, which came...