Plaster mold casting is a metalworking casting process similar to sand casting except the molding material is plaster of Paris instead of sand. Like sand...

lost-wax casting (which may be further divided into centrifugal casting, and vacuum assist direct pour casting), plaster mold casting and sand casting. The...

of plaster mold casting and investment casting. There are two types of ceramic mold casting: the Shaw process and the Unicast process. These casting processes...

Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and...

Spin casting, also known as centrifugal rubber mold casting (CRMC), is a method of utilizing inertia to produce castings from a rubber mold. Typically...

Plaster casting may refer to: Plaster cast Plaster mold casting, a metalworking process that uses plaster as the mold material This disambiguation page...

of artists, eventually amassing a collection of 50 plaster phalluses. In 2000, she began casting female artists' breasts. Albritton was born in Chicago...

Plaster is a building material used for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements. In...

sculpture is then covered with mold material (e.g., plaster), except for the bottom of the mold which must remain open. When the mold has hardened, the encased...

may also be dunked into containers of mold media (except plaster). Mold curing and reinforcement. The applied mold material cures to a more rigid and solid...

used for this form of casting have most commonly been made of sand, tufa stone, and cuttlebone as well as charcoal and plaster as these materials are...

materials allow a mold to be subject to application of external pressures up to 4.0 MPa; much higher than slip casting in plaster molds where the capillary...

rigid-setting construction material made of paper and a wet paste Plaster mold casting Plasticine Putty Salt dough, used for modelling (such as Play-Doh)...

plaster like material rather than sand, so the wax "pattern" can only be used once. Plaster of Paris is usually used in making master dies and molds,...

Contini & Son (also known as A. J. Contini & Son) was a fine art plaster mold casting firm founded by Italian American Attilio Contini and his son Cesare...

are all used for casting sculptures and other art objects as well as molds. Considerably harder and stronger than straight plaster of Paris, these products...

Winnett Orr, US Army surgeon who developed orthopedic plaster casts Orthotics "Description of Casting of upper limb". "Long leg cast then hinged knee brace...

slip casting. This is where slip or, liquid clay, is poured into a plaster mould. The water in the slip is drawn out into the walls of the plaster mould...

produces metal castings. Metals are cast into shapes by melting them into a liquid, pouring the metal into a mold, and removing the mold material after...

portal Full-mold casting Lost-foam casting Investment Casting Process Description Kalpakjian & Schmid 2006. Investment Castings "Investment casting". Retrieved...

to casting, cast molds tend to have additional costs associated with the manufacturing of the tooling, whereas fabricated steel or aluminum molds, particularly...

This initial mold can be relatively weak but flexible. A hard mother mold, also known as a jacket or matrix, is typically made of plaster bandage which...

molded stucco and plaster. The terms "stucco" and "plaster" are used almost interchangeably in this context to denote most types of stucco or plaster...

assemble a ghost figure by using one teammate as a wire mesh mold for a plaster mold casting before receiving their next clue. In Grab a Hold, teams had to travel...

cast in molds, it can form any shape. To strengthen it, coarse cloth or bagging, or fibers of hemp or jute, are put into the molds before casting. It becomes...

pouring a suspension of magnetized ceramic micro-plates. Pores in the plaster mold absorb the liquid from the suspension, solidifying the material from...

effective in producing high-relief design on glass than plaster or wooden molds. The development of the mold-blowing technique has enabled the speedy production...

statue was divided into ten sections. A mold for each of these segments was produced using the sand casting method (sand mixed with epoxy forms to the...

made from the original plaster mold by the Musée Rodin after Rodin's death. The Thinker exists as bronze casts, exhibition plaster casts (some were painted...

tires. As an example, it can be used to make castings from a plaster piece mold or waste mold, and to make a mold from a shellacked clay original. In this...