footprint and with the same functions assigned or usable on the same pins. Pin compatibility is a property desired by systems integrators as it allows a product...
6 KB (736 words) - 04:13, 10 August 2024
License compatibility, of software licenses Pin compatibility, in devices that have the same functions assigned to the same particular pins Software...
3 KB (336 words) - 01:24, 25 March 2025
Drop-in replacement (redirect from Drop-in compatibility)
component may no longer be supported, maintained, or manufactured) Pin compatibility Plug compatible Clone (computing) Backward compatibility Kludge v t e...
1,008 bytes (99 words) - 19:50, 16 March 2025
family Logic gate Open collector Operational amplifier applications Pin-compatibility Reference designator Regarding "voltage and current".: 1-5–1-6 Used...
11 KB (1,213 words) - 14:09, 23 March 2025
circuits List of LM-series integrated circuits Programmable logic device Pin compatibility "1963: Complementary MOS Circuit Configuration is Invented". Computer...
10 KB (1,004 words) - 23:47, 3 December 2024
Plug compatible (redirect from Plug compatibility)
early products. Bug compatibility Clone (computing) Computer compatibility Drop-in replacement Hercules (emulator) Pin compatibility Proprietary hardware...
10 KB (1,174 words) - 02:43, 24 January 2025
while maintaining pin compatibility throughout its lifetime. However, clock, timing, BIOS and voltage differences restrict compatibility between older chipsets...
8 KB (729 words) - 15:54, 29 November 2024
EMV (redirect from Chip and PIN)
integrated circuit chips, in addition to magnetic stripes for backward compatibility. These include cards that must be physically inserted or "dipped" into...
87 KB (9,419 words) - 08:39, 10 May 2025
MMX and SSE instruction sets 0.13 μm (130 nm) fabrication process Pin compatibility between all NX family processors. OS support: Linux, Windows CE, MS...
21 KB (2,059 words) - 17:17, 7 August 2024
calculator array 6501 – CPU pin-compatible with Motorola 6800 6502 – CPU equal to 6501 except no 6800-pin-compatibility 65CE02 – CPU derived from the...
25 KB (2,850 words) - 05:50, 6 May 2025
manufacturers supplying BIOS updates. In addition to the Phenom II's pin compatibility, the AM3 memory controller supports both DDR2 and DDR3 memory (up...
23 KB (2,508 words) - 02:40, 25 February 2024
Three-state output Schmitt trigger input Programmable logic device Pin compatibility "The Benefits of Ancient Logic | Analog Devices". "Standard Logic...
42 KB (1,102 words) - 21:22, 10 March 2025
affected by a few minor compatibility problems, the Nx586 lacked a floating-point unit (FPU) and (the then crucial) pin-compatibility, while the K5 had somewhat...
105 KB (10,776 words) - 12:49, 18 April 2025
supported OS support Windows 95 and Windows NT Packaging - 256 pin BGA Pin Compatibility with OAK OTI-74217 EON 2D GUI accelerator OTI037C - 8-bit VGA...
13 KB (1,471 words) - 16:25, 5 January 2025
Three-state output Schmitt trigger input Programmable logic device Pin compatibility R. M. Marston (31 October 1996). Digital Logic IC. Newnes. p. 21....
76 KB (5,119 words) - 09:22, 4 April 2025
trigger input Logic gate, Logic family Programmable logic device Pin compatibility "1967–1968 Integrated Circuits Catalog (page 10)". Texas Instruments...
285 KB (1,789 words) - 09:03, 19 May 2025
includes FPU SAM4L – ARM Cortex-M4 core SAM4N – ARM Cortex-M4 core, pin-to-pin compatibility with SAM4S, SAM3S, SAM3N, SAM7S devices SAM4S – ARM Cortex-M4 core...
23 KB (2,115 words) - 21:07, 27 October 2023
logic) 7400 series (commercial transistor-transistor logic) Logic gate Pin-compatibility Open collector Savard 2018 Mueller, Dieter (2005). "Logic gates"....
26 KB (2,894 words) - 17:24, 10 April 2025
S-Video (section 4-pin mini-DIN)
signal and the Y/C method of encoding was key to offering backward compatibility. Once the Y signal is produced, it is subtracted from the blue signal...
15 KB (1,645 words) - 16:22, 17 May 2025
AC power plugs and sockets (redirect from Three pin plug)
connecting the two power pins. The earth pin spacing corresponds to that of NEMA 5 and provides compatibility with prior hybrid three-pin sockets, which accept...
120 KB (13,707 words) - 09:20, 19 May 2025
7400-series integrated circuits, List of 7400-series integrated circuits Pin compatibility Suffixes that denote specific versions of the part (e.g. LM305 vs...
31 KB (1,133 words) - 14:19, 21 November 2024
USB 3.0 (redirect from USB 3.0 backward compatibility)
four pins and wires for the USB 2.0 backward-compatibility, resulting in nine wires in total and nine or ten pins at connector interfaces (ID-pin is not...
60 KB (6,277 words) - 17:21, 16 May 2025
SATA (section Standard power connector (15 pins))
the predominant interface for storage devices. Serial ATA industry compatibility specifications originate from the Serial ATA International Organization...
93 KB (8,855 words) - 03:05, 11 May 2025
Digital Visual Interface (section Compatibility)
with the analog VGA interface by including VGA pins, while DVI-D devices are digital-only. This compatibility, along with other advantages, led to its widespread...
30 KB (3,438 words) - 19:24, 14 February 2025
ISO 9564 (section PIN entry devices)
transmission of PINs between those entities – so a common set of rules for handling and securing PINs is required, to ensure both technical compatibility and a...
12 KB (1,659 words) - 05:21, 11 January 2023
in the FX/40, FX/80 and VFX machines. In addition, because of the pin compatibility, existing FX/4 and FX/8 systems could be field upgraded to FX/40 and...
10 KB (1,359 words) - 12:19, 24 December 2024
PCI Express (section 6- and 8-pin power connectors)
older standards, including higher maximum system bus throughput, lower I/O pin count, smaller physical footprint, better performance scaling for bus devices...
139 KB (12,986 words) - 09:51, 16 May 2025
USB-C, or USB Type-C, is a 24-pin reversible connector (not a protocol) that supersedes previous USB connectors and can carry audio, video, and other...
96 KB (8,774 words) - 02:24, 7 May 2025
USB4 (section Cable compatibility)
specification. The USB4 standard mandates backwards compatibility to USB 3.x and dedicated backward compatibility with USB 2.0. The dynamic sharing of bandwidth...
75 KB (7,011 words) - 11:01, 12 May 2025
USB On-The-Go (section Backward compatibility)
the same type). OTG adds a fifth pin to the standard USB connector, called the ID-pin; the micro-A plug has the ID pin grounded, while the ID in the micro-B...
24 KB (3,189 words) - 20:03, 20 February 2025